Job Listings

  • required to fabricate parts (clips, brackets, etc.); installing parts, read drawings and interpret blueprints.
  • wiring installations, fabricating wiring harnesses, installing racks, wiring diagrams, schematics, avionics upgrade, on E6 and Sherpa.
  • Modifying / installing ISR systems on a G550 and updating avionics on T1A/ Jayhawk - Beechjet 400A or Hawker 400A
  • Contract-to-hire
  • Must have A&P license
  • Must have tools (etched, shadowed and inventory list)
  • Must be flexible with shift
  • Pay rate will be based on corporate A&P experience

Aerotek is seeking Sheet Metal Assemblers:NO TOOLS NEEDED$25 - $27/hrMain Responsibilities:

Candidates will be performing structural repair work as well as troubleshooting mechanical systems. They will be doing this in a service center environment on business aircraft. Non-climate controlled environment where customers are allowed to walk the floor. Qualifications:

Duties Include:

  • wiring installations, fabricating wiring harnesses, installing racks, wiring diagrams, schematics, avionics upgrade, on E6 and Sherpa.
  • Modifying / installing ISR systems on a G550 and updating avionics on T1A/ Jayhawk - Beechjet 400A or Hawker 400A

Must Haves:

Conducting heavy maintenance on ERJ 135, 145, and EJET 170, and 190 aircraft; Candidates must have A&P license; We are seeking A&P's with experience with ANY of the following aircraft;Embraer products ERJ135 E170 E195 ERJ145 E175 Legacy E190 Saab aircraft SF340A SF340B SF340B+ Bombardier CRJ200 CRJ700 CRJ900 Airbus A319A320BoeingB737B747B757B767Rotary and other military fixed wing wil

Minimum Requirements

Candidates will be Repairing and installing avionics systems on corporate jet aircraft. Job Responsibilities:To identify malfunctions, remove, repair and install a limited variety of aircraft communication, navigation, avionics, and electrical components.

Our client is currently looking to hire Contract Avionics Technicians. This is due a few recent contract that were awarded that will involve individuals to perform heavy modification work on King Airs, Dash-8's and Beech1900s. Looking to employ individuals for the next 6-9 months.

We need mechanics with 2+ years of experience as A&P mechanics with the following keywords in their resume:* CFM engines (or CF34 would do), CF6-80, CFM56-x, V2500, and PW4000 engines * Line maintenance* Engine removal * Assembly/disassemblyA&P license requiredCandidates must possess/be willing to get a passport.

We are currently looking for Aircraft Assemblers with experience working with Avionics and harness install systems. JOB DESCRIPTION:

A&P Mechanic Instructor

  • Location: Teterboro, NJ
  • Hours: Monday - Friday / 8:00 AM - 4:00 PM
    • Opportunity for quarterly cash bonuses
    • Paid time off for closures/holidays
    • Benefits
    • 6 Month Contract to Hire

Job Description

A large Business Maintenance facility in Tucson, AZ is currently looking for Structures Technicians to perform modifications and repairs on the Challenger, Global Express, and Learjets.

Job Description:

  • Polish materials before and after paint with grinder

Work Environment:

  • General Labor, Paint Prep, PolisherCore hours are 7-3:30 M-F. OT is available by working 6-4:30. Saturday work 6-noon is available


Currently seeking A&P mechanics for Kinston, NC facility. The aircraft being worked on provides support for Fedex and are ATR-42's and ATR-72's (cargo carriers). Job responsibilities include:

Inspect aircraft assembly activities and products (pre and post assembly) for flight prep team in conformance with government and company standards and specifications. Report deviations and support preventive and corrective actions analysis aiming the delivery of products and services at their highest quality to customers. 1.

Mechanics will be performing overhaul on aircraft to include working on landing gear, Lavs, some interiors work to include displacing insulation, exterior components on the engine, rigging flight controls, opening up the wings and stabilizer panels, and leading edge of the vertical stabilizer.We have a need for 10 A&P Mechanics- These will be indefinite contracts with the potential to go pe

Job Description:The successful candidate will be required to fabricate parts (clips, brackets, etc.); installing parts, read drawings and interpret blueprints.The qualified candidate must have a minimum of 6 years experience; Candidates will be responsible to:

An MRO in Wilmington, OH is looking for Avionics Technicians. Work will entail Avionics Modifications on 737, 757, and 767 aircraft. Candidates must have a minimum of 4 years of experience. Must have MRO or airline experience. Must have experience performing major installations and be able to install harnesses per wiring diagrams and the ability to terminate wires.

Calling all UH-60 Avionics Technicians!Are you looking for a great opportunity to utilize your experience as an avionics technician?The position is at McGuire Air Force Base in Lakehurst, NJ, as a UH-60 Avionics Technician (MH/HH/SH/VH also acceptable).

Candidates will be working as an avionics technician in a repair station environment.This person will be responsible for installing and upgrading avionics systems on various twin engine/smaller GA aircraft (Beach, Piper, Cessna, Mooney)Will be troubleshooting defects in systemsMUST HAVE: 1.

Job DescriptionQualifications:

  • (2) to (4) years' experience in the aviation field or two (2) years of accredited schooling in aviation electronics and two (2) years related experience

Job Duties:

Aerotek is looking to hire several A&P Mechanics for a large aircraft company in Wichita, KS.

Job DescriptionTo safely manage daily maintenance requirements of the fleet and communicate with internal and external customers all maintenance related events and outcomes. All SOC positions share the common responsibility of maintaining situations awareness of the operations taking place both across our system and within the SOC.

A&P Mechanic - Corporate JetsTitle: Aircraft MechanicLocation: Mesa, AZDuration: 6 month contract to permanent hire Note: Permanent hire is highly encouraged but not requiredCompensation: $25 - 30/hr depending on experienceStart Date: ASAPInterviews: By phone, interview with DOMJob Description:Aerotek is seeking to hire a full-time aircraft mechanic for a job opportunity in Mesa, AZ


About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (
Editorial Director

Greg Napert (
Publisher, Sales & Marketing

Bob Graf (
Director of Business, Sales & Marketing