Job Listings

Full-Time GSE Mechanic Needed!
Training Provided
We Service Private Jets

STS Technical Services is hiring Aircraft Sheetmetal Mechanics in Shreveport, Louisiana.
Overall Responsibilities:
The Structure Mechanic is responsible to inspect, overhaul, repair, modify, and troubleshoot airframe parts, systems, and components. The Structures Mechanic is responsible to perform work within the FAA, and company standards of quality
Job Duties:

A&P MechanicTampa, FloridaFull-TimeJob ID: 1810092126 DESCRIPTIONPDS Tech is seeking an A&P Mechanics in multiple locations, IMMEDIATE NEED AT ALL LOCATIONS.

We need an A&P Mechanic with Embraer Phenom experience to work out in Greenville, SC! Factory trained and experienced mechanics desired

Manager, Mtce ProgramsDenver, CO Frontier Airlines is committed to offering #8216;Low Fares Done Right#8217; to more than 80 destinations in the United States, Canada, Dominican Republic and Mexico on more than 300 daily flights.

Job PurposeThe Electrical Fabricator assembles and tests wire harnesses and cable assemblies as well as electro-mechanical assemblies in accordance with documented procedures, approved engineering drawings and established industry standards.Duties and Responsibilities

This position will create, implement and manage detailed project plans to facilitate and support the project strategy and execution phases. Provide planning, administrative, budgetary, and direct supervision to assigned Heavy Maintenance lines. Ensure work is performed safely within budgeted time and while remaining in regulatory compliance and meeting customer and company guidelines.

Applies basic and some advanced technical knowledge to solve routine problems by interpreting manufacturers#8217; manuals or similar documents. Work requires familiarity with the interrelationships of circuits and judgment in planning work sequence, in selecting tools, testing instruments, and is reviewed for compliance with accepted practices.

Quality Inspector- Tamarac, FL Must have an A&P license Must be flexible for Day Shift Borescope experience is a plus 3 years of Aircraft Engine experience: P&W If you're interested call 7547022443 Amberlyn Acevedo

ZENETEX has become a major force in the field of aircraft maintenance. We proudly support all four branches of the military in performing Organizational, Intermediate, and Depot level aircraft, ground vehicle, and component maintenance. We have an opportunity for an Aircraft Mechanic I, Powertrain to support our Contractor Field Team (CFT) in Savannah, GA. Primary Duties and Responsibilities

Duration 1 yearDescription REQUIRED EXPERIENCE:High school diploma or equivalent required with 6 years related experienceWe are looking for highly motivated individuals that are willing to work in a fast paced manufacturing environment covering multiple programs.Position requires Assembly Tooling and or composite tooling background with assorted Computer-Aided Measurement Systems (C.A.M.S.) and

Duration 12 MonthsDescription Chipton-Ross is seeking an Inprocess Inspector A (2) for an opening in Anaheim, CA. RESPONSIBILITIES:Performs visual, mechanical and some electrical Inprocess and final inspection under general supervision. Assures compliance to company specifications.1. Verify previous operations are performed and accepted.

Duration 6 MonthsDescription Chipton-Ross is seeking an Assembler/Insulator/Lagger (2) for an opening in Goose Creek, SC. RESPONSIBILITIES:Performs a variety of tasks in production assembly operations on electronic and/or mechanical assemblies and subassemblies. Works from diagrams and drawings and uses hand and/or power tools, jigs, and saws.

Duration 3 MonthsDescription Chipton-Ross is seeking a Packer/Shipper (2) for an opening in Grand Rapids, MI. RESPONSIBILITIES:Receives, unloads, and unpacks shipments of components, supplies, tools, etc. Checks packing slips and orders to verify proper count, weight and identification, Packs all units and manufactured products for shipment.

Duration 6 MonthsDescription Chipton-Ross is seeking a Manufacturing Engineer - Level 3 for an opening in Canoga Park, CA.

Duration 6 MonthsDescription Chipton-Ross is seeking a Manufacturing Engineer - Level 1/Level 2 (3) for an opening in Canoga Park, CA.

Duration 6+ monthsDescription Chipton Ross is seeking 2 Structural Mechanics for openings in Hawthorne, CA. Overview:Function: Perform structural assembly and fastnener installation operations of major/complex components and assemblies. Assure quality conformance to company/customer requirements and specifications.

Duration 12 MonthsDescription Chipton-Ross is seeking an Electrical Technician Level 2 (8) for an opening in Orlando, FL. RESPONSIBILITIES:Electronics Technician qualified and trained to support electrical/mechanical fabrication and limited testing associated with aerospace related or comparably critical systems.

Duration 5 MonthsDescription Chipton-Ross is seeking an Assembler Level 2 (5) for an opening in Archbald, PA. RESPONSIBILITIES:Assemble cables and harness assemblies. May be required to perform a variety of electrical assembly operations; such as soldering, wiring, cutting, chassis marking, preparing terminations, harness or cable forming and lacing.

Duration 15 MonthsDescription Chipton-Ross is seeking a Manufacturing Engineer Level 1 (2) for an opening in Archbald, PA. REQUIRED EXPERIENCE:Knowledge of manufacturing processes and equipment. o Ability to work in a team environment and to interface with other groups and functions. o Experience with MS Office Suite especially Word, Excel and PowerPoint.

Duration 11 MonthsDescription Chipton-Ross is seeking an Assembler Level 2 for an opening in Oldsmar, FL. RESPONSIBILITIES:o Uses microscope to verify correct part placement and orientation, manually align parts before soldering and perform post reflow inspection and touchup.

JOB DESCRIPTION:Aircraft Mechanic, Aircraft maintenance Removal-installations landing gear, engine components, Removal-installations electrical components, control systems , Perform periodic maintenance servicing of all aircraft mechanical systemsREQUIREMENTS:2-5 Years of Aircraft Maintenance Experience

How many times have you said to yourself: "I would love a position that isn't hands-on in aviation but that doesn't seem like it is a reality sometimes.

Do you have diesel mechanic or ground support equipment experience? If so... THIS is the opportunity you are looking for.

Aerotek is looking for one aerospace inspector for a growing aerospace manufacturer. Please call Cosette Romero 424-531-6081 if interested!Qualifications:Requires 3+ years aerospace related Quality Control inspection experience. Experience must include interface with reading blueprints with GD&T About Aerotek:We know that a company's success starts with its employees.


About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (
Editorial Director

Greg Napert (
Publisher, Sales & Marketing

Bob Graf (
Director of Business, Sales & Marketing