Job Listings

A large client of ours is looking to hire qualified A&P mechanics. They are willing to look at entry-level candidates who are looking for a long-term opportunity.QUALIFICATIONS:

  • Current FAA Airframe and Powerplant (A&P) certificate
  • Must have own set of basic tools
  • Ability to relocate to San Jose, CA on your own


Avionics Technician-Colorado Springs and Centennial, COSalary: $35.50 /hour RESPONSIBILITIES:

  • Assembly/fabrication of wire harnesses and other avionics assemblies
  • Strong blueprint or schematic reading.
  • Wire termination, soldering, splicing, and other avionics skills


Expereince with the following: * CFM engines or CF34* Line maintenance* Engine removal* Assembly/disassembly * Performs mechanic skills including, but not limited to, mechanical, electrical, pneumatic, hydraulic, of engine models to include but not limited to CF6-80, CFM56-x, V2500, and PW4000 engines in accordance with Original Equipment Manufacturer (OEM) specifications.* Reads and interpre

Job Description:

  • Installing In-Flight Entertainment and LED's on Dash-7
  • Mon- Fri 7am - 5:30 pm
  • Some Saturdays and Sundays will be required
  • There will be periods of 3 weeks that the contractors could be required to work 60-70 hours a week.

Work Enviorment:

Description:The successful candidate will be required to fabricate parts (clips, brackets, etc.); installing parts, read drawings and interpret blueprints.The qualified candidate must have a minimum of 6 years experience; Candidates will be responsible to:Accomplish all facets of aircraft sheetmetal and structural repair, maintenance, modification and component installation* Disassemble, repair

Aerotek Aviation is looking for an avionics installer/trouble shooter to work on corporate jets. Job description :

  • Avionics installation
  • Avionics troubleshooting
  • Able to read blue prints and wiring diagrams


Aerotek aviation is looking for a licensed A&P engine overhaul mechanic.Job description:This person will be responsible for tear down, overhaul, and rebuild of engines in their back shop. This person will also travel 6 months out of the year to AOG to repair specific engine models.(cfm56,cfm34,cf6)Qualifications:

Aerotek Aviation is looking for Corporate A&P mechanics .Job Description:

Aerotek Aviation is looking for a sheet metal mechanic to start as soon as possible. Job description :Candidate will be performing sheet metal fabrication on air craft. Job qualifications:

Aerotek Aviation is looking for A&P mechanics .Job Description:

Our client, the world's leader of Business Aviation, is currently seeking to hire numerous qualified Structural Mechanics with aviation experience.

Our client, the world's leader in Business Aviation, is currently seeking to hire several Aircraft Technicians to join their team Savannah, GA!The Aircraft Technician will be performing inspections, maintenance, and repairs of moderate to advanced complexity on aircraft systems/structures for business jet aircraft.Required Qualifications:

The world's leader in Business Aviation is currently seeking qualified Avionics Technicians to join their team Savannah, GA!The Avionics Technician will be working on a brand new advanced aircraft program and will be testing, troubleshooting and repairing aircraft system discrepancies within business jet aircraft. Required Qualifications:

Looking for 10 A&P mechanics to support their growth to fill openings for M-F (with some hours on the weekends to support busy season). They are looking for 10 A&P's that have 2-5 years of recent experience performing line maintenance and heavy checks on their required airframe products. Experience working on gulfstream, citations, lears, challengers, and hawkers will be accepted.

Preferred Qualifications: Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.Able to setup and use a variety of precision measuring instruments such as: dial indicators, micrometers, gauges, protractors, and calipers, etc.Able to use common hand tools such as: drills, reamers, deburrers, files, rivet gu

Need 3 A&P mechanics for a 6 month contract (could potentially go up to 1 year).The candidate will be responsible for line maintenance A-C checks. Experience in a FAR 121, FAR 135 or FAR 145 maintenance environment is highly preferred. Experience on current active fleet types (S-61, S-92, CASA 212, SA330J) is preferred.

*Perform Troubleshooting on LearJet Family Aircraft (primarily lear 35) to include electrical malfunctions and GPS/navigation systems. *Completes logbooks, non-routine work cards and documents in *Ability to work as a team player with avionics, parts, mechanics, inspectors, and management.

OEM in Melbourne FL seeking EXPERIENCED assembly technicians familiar with aircraft manufacturing


  • Four (4) years experience in an avionics/electrical career field: or two (2) years of accredited schooling in aviation electronics and two (2) years related experience

Job Duties:

"Traveling and being on the road are 'my thing'! I've done TDYs before in the military and have even been OCONUS for a few contracts so this is right in my wheelhouse, Frank, SIGN ME UP!" Aerotek-aviation is working with a partner of ours who is seeking various UH-60 Blackhawk Sheet Metal Mechanic/Structural Mechanic.

"I would love a position that isn't hands-on in aviation but that doesn't seem like it is a reality sometimes... " Are you looking for something that allows you to take the taxing, physical hands-on work out of aviation? What about a laid-back environment, a day-shift and Monday-Friday? That seems like a foreign concept in aerospace...

"Traveling and being on the road are 'my thing'! I've done TDYs before in the military and have even been OCONUS for a few contracts so this is right in my wheelhouse, Frank, SIGN ME UP!" Aerotek-aviation is working with a partner of ours who is seeking various UH-60 Blackhawk avionics technicians.

Job Description -Assembler will be putting together various aerospace safety and propulsion products used for military, defense and commercial aircraft. All products contain some energetic material and are designed for keeping passengers safe. -Assembler is responsible for putting together basic to complex assemblies and sub- assemblies to create finished products such as rocket motors.

Aerotek is searching for multiple Tech I and Tech II Avionics Technicians for a growing aviation facility in the Palmdale, CA area.The company is seeking candidates looking for long term career opportunities with opportunities for advancement. Candidates must be willing to deploy as needed on a rotational basis (generally an average of 4 months a year).


About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (
Editorial Director

Greg Napert (
Publisher, Sales & Marketing

Bob Graf (
Director of Business, Sales & Marketing