Job Listings

JOB DESCRIPTION: This family is responsible for performing customer support activities involving the installation, modification, and repair of complex equipment and systems. Conducts on-site installation and testing of equipment to ensure proper working order. Isolates equipment start-up malfunctions and takes corrective action.

*Perform Troubleshooting on LearJet Family Aircraft (primarily lear 35) to include electrical malfunctions and GPS/navigation systems. *Completes logbooks, non-routine work cards and documents in *Ability to work as a team player with avionics, parts, mechanics, inspectors, and management.

Mechanics will be performing "C" checks on regional Boeing 737 aircraft. the project will go for at least 45 - 60 days and there is the possibility to go permanent after the contract. will be required to have their own tools.

A&P Mechanic:Performs airframe, powerplant and propeller repairs and modifications on corporate jet aircraft.Removal and disassembly of defective parts; assembly and installation of replacement parts; and testing aircraft systems.Performs routine inspections and troubleshooting, including airframe structures, engines, and aircraft systems using approved or accepted data issued by the manufa

Preferred Qualifications: Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.Able to setup and use a variety of precision measuring instruments such as: dial indicators, micrometers, gauges, protractors, and calipers, etc.Able to use common hand tools such as: drills, reamers, deburrers, files, rivet gu

Located at Ft. Lauderdale Executive Airport, Banyan Air Service is a full service general aviation fixed base operator (FBO) with six different departments. POSITION DESCRIPTIONWe are searching for 3 Aircraft Maintenance Technicians to perform services to their customer's aircraft in accordance with FAA/JAA regulations in a Part 145 Repair Station environment.

Our client, the manufacturer of the world's most advanced business aircraft, is currently seeking numerous Structural Mechanics to join their growing team! Skill Level: Numerous positions available at various skill levels, from entry level to senior level. Please see minimum requirements below.Requirements:

Final Line Quality TechOne of Savannah's largest manufacturing plants is currently in need of a Quality Technician to join their team!

Our client, the manufacturer of the world's most advanced business aircraft, is currently seeking Sheetmetal Mechanics to join their growing team! Numerous sheetmetal positions available at various skill levels, from entry level to senior. Please see the minimum requirements for each below.

Pay Rate: is $30/hr Per Diem Split: $14taxed and $16UntaxedQualifications:

  • 6+ years of heavy sheet metal modification and repair experience
  • Turboprop aircraft experience is preferred
  • Must have own tools

Job Duties:

Avionics Technician SIGN-ON BONUS & RELOCATION ASSISTANCE OFFEREDJob Description: This is a long term opportunity where the Avionics Technicians will be initially be performing modifications and conversions from the UH-60L model to the G model.

Aerotek aviation is looking for 3 jet engine mechanics to start immediatelyJob description: Aircraft engine mechanics with GE experience, CFMI experience

Aerotek aviation is looking for 5 sheet metal techs to join the team.Job description:sheet metal tech must have experience in an MRO facility. The candidate must have experience with engine nacells and thrust reversers. Also must have experience skinning , or deskinning, excellent rivit skills, flight control and over haul experience .Qualifications:

Aerotek Aviation is looking for Corporate A&P mechanics .Job Description:

Aerotek Aviation is looking for Corporate A&P mechanics .Job Description:

Currently seeking candidates with previous experience wire crimping, soldering, point to point wiring and reading blueprints/schematics.Candidate will be responsible for building test benches for the B2 Software LabTest benches are "drawers" that are used to test software equipment for the B2 lab.....Upgrading existing equipment.

Uses metal core mig, tig, and fluxcore welding process (must pass two or more)Ability to pass applicable test(s) and applicable Non Destructive ExamMay weld brackets and braces and use grinders. May position pieces to be welded into jigs, holding fixtures, guides and steps using measuring instruments and hand tools.

Must be able to accomplish any and all repairs, modifications, E.A.'s, etc, with minimal or no supervision on Boeing 737, MD-80, CRJ/ERJ aircraft. Must be able to use SRM, all tech data, and aircraft drawings to locate part numbers and accomplish repairs. Must be able to fabricate parts. Must be able to accomplish cold working, flap peening, etc.

Candidate will be responsible for building test benches for the B2 Software LabTest benches are "drawers" that are used to test software equipment for the B2 lab.....Upgrading existing equipment. Key responsibilities include soldering, interpreting schematics/drawings, and building wire harnesses About Aerotek:Our people are everything.

Our client, located in Hagerstown, MD is currently seeking Sheetmetal Mechanics for a long term contract opportunity.Qualifications:

  • 10+ years of heavy sheet metal modification and repair experience
  • Turboprop aircraft experience is preferred
  • Must have own tools

Job Duties:

A helicopter FAA Part 145 repair station in Philadelphia, Pa is currently hiring Avionics Technicians (A&P) for full time opportunities.

Aerotek is hiring Aircraft Sheet-metal & Structural mechanic's for full time opportunities performing aircraft structural assembly in Philadelphia, PA.

A helicopter repair facility in Philadelphia, PA is hiring for immediate openings for Helicopter Airframe and Powerplant (A&P) Technicians

An Aircraft Wheel and Brake facility in Bethlehem, PA is looking to hire a qualified NDT Level II inspector for a full time opportunity.

A helicopter repair station in Philadelphia, PA is looking to hire several Aircraft Quality Control Inspector's for a full time opportunities

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more.

The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901