Job Listings

Full Time A&P Mechanic needed at San Francisco Airport (SFO). These positions will perform aircraft maintenance for the companys airline customers.

For 60+ years our client has provided instrument support services to the aviation industry and became one of the premier sources for new and overhauled aircraft instruments and aircraft components.Work Environment:10-12 Technicians that they work with directly. Report directly up to Chief Inspector.Qualifications: REQUIREMENT

Mechanic working on Learjet, Beechjet or King Air, performing intermediate and heavy maintenance tasks on turbine and turbofan powered airplanes.Perform daily, intermediate and heavy maintenance tasks on turbine and turbofan powered airplanes. Participate in the support of our aircraft fleet after hours maintenance on call during the week, weekends and holidays.

Looking for A&P Mechanics with minimum of 2 years of aircraft maintenance experience to work in a new hangar facility in Moses Lake, WA. A&P License required.If interested contact Vanessa Nooralian at 424-531-6102JOB DUTIES:

Aerotek is currently seeking 5 Aircraft Mechanics to perform phase maintenance on SH-60 aircrafts.QUALIFICATIONS:

  • 4+ years experience
  • SH-60 or MH-60 experience required
  • Phase maintenance or RESET experience required
  • A&P preferred but NOT required

WORK ENVIRONMENT:

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety or conformance to approved data and Company standards and requirements.1.

Job DescriptionAerotek is seeking to hire a Structures Mechanic who will be responsible for performing heavy maintenance on turboprop aircraft.This is a 40+ hours/week position with opportunity for either long-term contracting or permanent hire.Mechanic will work in an MRO environment repairing aircraft structures in both hangar and shop settings.

Aeroteks client located at the Spirit of St. Louis Airport in Chesterfield, MO is currently looking to hire 8 qualified structures mechanics.Job Description:Performing structural modifications on various Bombardier aircraft. Fabricating brackets, hat channels, cutting extrusions to form assemblies to install on aircraft. Working off of blue prints/engineering drawings. Qualifications:

Our client located is looking to hire a Corporate A&P mechanic to perform maintenance on their Corporate Aircraft. They will be performing scheduled maintenance that varies from light bulb changes, tire changes to engine changes. Also, performing routine maintenance on Corporate Aircrafts. Perform aircraft post flights and inspections.

Job Description: * Repair, replace, and rebuild aircraft structures, assemblies, and sub-assemblies. * Must have the ability to read and understand technical data such as maintenance manuals, parts catalogs, engineering drawings, service bulletins, and airworthiness directives.

Looking for 2 assembly techs who have experience working on aircrafts. A&P license not needed ShiftMonday - Friday 2nd 3:30pm - 12am If you are interested in this position, please call Lauren Bolhuis at 321-775-4109 or email at lbolhuis aerotek.com About Aerotek:We know that a companys success starts with its employees.

20/Hr. Seeking A&P mechanics to support cargo carriers ATR-42s and ATR-72s. Job Description:

Looking for 1 Sheet Metal Technician who is capable of fabricating parts to a print and maintaining close tolerances while doing so. They will also be installing MWO kits on UH-60s. Candidates will also be responsible for fabrication and/or modification of related sheetmetal/structural parts and components.

RESPONSIBILITIES: Install and repair all avionics systems in a efficient and safe manner. Individual must be able to perform this task with minimal or no supervision. Technician must be capable and experienced to perform 91.411 and 91.413 inspections.Have a complete understanding of IFR ramp test equipment or equivalent.

POSITION DESCRIPTIONWe are searching for Aircraft Maintenance Technicians to perform services to their customers aircraft in accordance with FAA/JAA regulations in a Part 145 Repair Station environment.

An established company that provides services to locations throughout the United States is actively seeking a qualified field service technician in the Raleigh, NC area and surrounding areas.The field service technician will be responsible for planning and coordinating scheduled maintenance at various airport locations, sea ports and / or land entry points throughout the Raleigh, NC area and su

This position will be for Facilities/Maintenance and would be 1st shift from 7am-3:30pm. Looking for individuals with maintenance/facility experience. Must be able to lift 40-50 LBS. Attendance and punctuality is key.Please note that this is a temp-to-hire position but would not guarantee an opportunity to become an employee.If interested please respond to Posting or Call 918-877-7907.

Aerotek is currently seeking several SH-60 Aircraft Mechanics to support an SH-60 PMI program performing phase maintenance on SH-60 aircraft at a well established company in Huntsville, Alabama.Work Environment: Air Conditioned facility40hrs/week (OT as needed)Qualifications: 4+ years experienceUH-60 or Similar Aircraft Experience is requiredPhase Maintenance or RESET experience preferredA&

A Regional airline at the Cincinnati/Northern Kentucky Airport is looking for A&P mechanics. Work will entail overnight hangar maintenance on Embraer aircraft. Candidates must have an A&P License. At least 1 year of experience is preferred. This is a 4 month contract to hire position.

An aircraft charter company in Bay City, WI is looking for A&P mechanics Work will entail preventative and regular scheduled maintenance on Corporate and General Aviation aircraft. Candidates must have an Airframe and Powerplant License. Corporate or General Aviation experience is preferred.

UH-60 Blackhawk Avionics Technician

Southern Sky is seeking A&P Mechanics (Piston Mechanics) to work in their Corporate Jet Services Department that provides maintenance and support on their general aviation aircraft at the Birmingham International airport.

Now Hiring Maintenance Technicians in North Tulsa!MUST BE PROFICIENT IN REPAIR AND MAINTENANCE OF INSTRUMENTS AND MACHINES. EXPERIENCE IN FIVE (5) AXIS CNC MACHINE WITH FANUC/SIEMENS CONTROLS A PLUS.Compensation:21.63 to 28.00 USD depending on experienceShift:Working in hangar space at Tulsa International Air. 4 - 10s M-Th and 3 -12s F-Sun.

JOB DESCRIPTION:A well-known corporate jet facility is looking for great A&P Mechanics to join their team for a short term contract potential long term direct hour. They perform schedule and unscheduled maintenance on Citations, Cessnas, Embraer and Cirrus model aircrafts.QUALIFICATIONS:

An established company that provides services to locations throughout the United States is actively seeking a qualified field service technician in the Lubbock, TX and Midland, TX areas.The field service technician will be responsible for planning and coordinating scheduled maintenance at various airport locations and land entry points throughout the Lubbock, TX, Midland, TX area and surroundin

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901