Job Listings

lt;brgt;lt;brgt;lt;stronggt;Job Description:lt;/stronggt;lt;brgt;lt;brgt;The A&&P Mechanics will be performing scheduled and unscheduled maintenance on Bell and Airbus commercial Helicopters. Will be working in a 145 repair station.

lt;brgt;lt;brgt;Avionics Technicians will be working on one of two different helicopter assembly lines.lt;br /gt;lt;br /gt;Install, troubleshoot and repair electrical wiring and avionics equipment on green AW139 and A119 and AW609 aircrafts.lt;br /gt;lt;br /gt;ASSIGNED DUTIES: lt;br /gt;* Read and interpret wiring diagramslt;br /gt;* Coordinate with Shift Lead and Engineering on changes to blue

lt;brgt;lt;brgt;The Aerotek Bremerton office is looking for Structural Welders to work in the shipyards in Bremerton. You must have previous welding experience. lt;brgt;lt;brgt;Welder, NAVSEA, fitting, brazing, Naval shipyard.lt;br /gt;lt;br /gt;lt;br /gt;1. Possesses standard tools for a welder.lt;br /gt;2. Able to work different shifts.lt;br /gt;3.

lt;brgt;lt;brgt;Our client in Bridgeport, WV is currently seeking qualified Sheetmetal/Structural Technicians for immediate employment. This is a 6-12+ month contract positions with a salary of $34/Hr.

lt;brgt;lt;brgt;Looking for candidates who are currently enrolled in A&&P school, testing out for their A&&P, or have already received their A&&P.lt;brgt;lt;brgt;Great opportunity to get your aviation career started with one of the most popular aviation companies.lt;brgt;lt;brgt;If interested please apply or give me a call!lt;brgt;lt;brgt;lt;br /gt; lt;brgt;lt;brgt;lt;br

lt;brgt;lt;brgt;lt;stronggt;**THIS POSITION IS IN TORONTO, ON**lt;/stronggt;lt;brgt;lt;brgt;Contractors will be responsible for making various aerospace parts. Every day will be different, parts can vary vastly in size, largest being lt;stronggt;17 ft longlt;/stronggt;. Contractors will be responsible for first off inspections along with the manufacturing engineer.

lt;brgt;lt;brgt;Seeking to hire a Bench Avionics Technician to perform repair of communication, navigation, autopilot, multifunction displays, and other avionics equipment at the component and circuit card level.lt;brgt;lt;brgt;This is a long-term position intended for permanent hire with a prominent avionics company, with training and growth opportunity.lt;ulgt;lt;ligt;Inspect, test, troublesh

lt;brgt;lt;brgt;Open to all level A&&P mechanics.

lt;brgt;lt;brgt;This position is located in Macon, GAlt;brgt;lt;brgt;lt;stronggt;Job Description:lt;/stronggt;lt;brgt;lt;brgt;- Perform overhaul on aircraft to include working on landing gear, Lavs, some interiors work to include displacing insulation, exterior components on the engine, rigging flight controls, opening up the wings and stabilizer panels, and leading edge of the vertical stabili

lt;brgt;lt;brgt;A growing manufacturing company looking for 5 Swiss lathe machinists to work as permanent employees.lt;brgt;lt;brgt;Please contact Cosette Romero at 424-531-6081 with any questions!lt;brgt;lt;brgt; lt;brgt;lt;brgt;lt;stronggt;Candidates will primarily be working on a 2nd shift.lt;/stronggt;lt;br /gt;lt;br /gt;Company is working on Torno Deco Swiss machines as well as new Star Sw

lt;brgt;lt;brgt;Our client located is looking to hire a Corporate A&&P mechanic to perform maintenance on their Corporate Aircraft. They will be performing scheduled maintenance that varies from light bulb changes, tire changes to engine changes. Also, performing routine maintenance on Corporate Aircrafts. Perform aircraft post flights and inspections.

lt;brgt;lt;brgt;lt;brgt;lt;brgt;Aerotek is searching for 30 pipefitters, welders and shipfitters for a growing shipyard in Bremerton, WA.lt;brgt;lt;brgt;lt;stronggt;Pay: $23/hour + 149/daily per diemlt;/stronggt;lt;brgt;lt;brgt; lt;brgt;lt;brgt;lt;stronggt;lt;emgt;All candidates need to have at least 3 years doing one of these trades in the maritime, shipyard or naval industry.lt;/emgt;lt;/stro

lt;brgt;lt;brgt;lt;stronggt;***This position is located in Greenville, SC***lt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;Job Titlelt;/stronggt;: Structure/Sheet Metal Mechaniclt;brgt;lt;brgt;lt;stronggt;Pay Ratelt;/stronggt;: $28 - $34 an hour (based on years of experience)lt;brgt;lt;brgt;lt;stronggt;Per Diemlt;/stronggt;: Yes, for qualified candidateslt;brgt;lt;brgt;lt;stronggt;Contractlt;/strongg

lt;ulgt;lt;ligt;Client of Aeroteks recently won work for the Garmin 5000 upgrades.

lt;brgt;lt;brgt;Maintenance Assistant will be responsible in providing support to all areas of facility maintenance to include the following:lt;br /gt;lt;br /gt; - Equipment repairlt;br /gt; - Facility maintenancelt;br /gt; - Delivery / pick up partslt;br /gt; - Maintaining a presentable facility through cleaning and paintinglt;br /gt; - May assist in warehouse operations which could lead to ev

lt;brgt;lt;brgt;LOOKING FOR A JACK OF ALL TRADES!lt;brgt;lt;brgt;Looking for a jack of all trades technician. Ideally someone who has experience within at least one trade including plumbing, electrical, or carpentry experience. The main goal is to find someone who wants to start a career within one trade and expand/evolve into other trades.

lt;stronggt;Job Description:lt;/stronggt;lt;brgt;lt;brgt;lt;brgt;Experienced A&&P licensed field service technician to perform engine repairs and module level work scopes both in the shop and in the field, domestically and internationally. Job duties include large range of maintenance from service bulletin and AD compliance to inspections and repairs and dis assembly to module swaps.

lt;brgt;lt;brgt;lt;stronggt;Pay Rate: $28/hrlt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;Per Diem Split Offeredlt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;NO tools Required and Ton of OT offered!lt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;lt;stronggt;lt;stronggt;Job Details:lt;/stronggt;lt;br /gt;lt;/stronggt;lt;/stronggt;lt;ulgt;lt;ligt;Work from process specifications, work orders, blueprints, rework/r

lt;brgt;lt;brgt;MINIMUM REQUIREMENTS lt;ulgt;lt;ligt;Must have 2 - 3 years of avionics install of corporate aircraft lt;/ligt;lt;ligt;Must have own toolslt;/ligt;lt;/ulgt;lt;brgt;lt;brgt; lt;brgt;lt;brgt;JOB DUTIES lt;ulgt;lt;ligt;Contract to direct position lt;/ligt;lt;ligt;Avionics system and hardware installs of corporate fixed wing aircraft lt;/ligt;lt;/ulgt;lt;brgt;lt;brgt;lt;br /gt; lt;br

lt;brgt;lt;brgt;lt;stronggt;Job Description:lt;/stronggt;lt;brgt;lt;brgt;* Work hands-on to provide optical components.lt;br /gt;* Work in a production environment to fulfill production work orders.lt;br /gt;* Complete daily schedule and assignments as assigned.lt;br /gt;* Enter data into production reports and software including excel and MRP systems.lt;br /gt;* Other duties may be assigned.

lt;brgt;lt;brgt;lt;stronggt;**THIS POSITION IS IN TORONTO, ON**lt;/stronggt;lt;brgt;lt;brgt;Contractors will be responsible for making various aerospace parts. Every day will be different, parts can vary vastly in size, largest being lt;stronggt;17 ft longlt;/stronggt;. Contractors will be responsible for first off inspections along with the manufacturing engineer.

lt;brgt;lt;brgt;A growing company with a location in China Lake, CA is seeking qualified avionics technicians to work on UAVs.lt;brgt;lt;brgt;This position is responsible for performing functional tests, operational tests, modifications, troubleshooting and repairs on Unmanned Aerial Vehicles / UAV (UAS) aircraft, ground support stations and related equipment.

lt;brgt;lt;brgt;RESPONSIBILITIES: Install and repair all avionics systems in a efficient and safe manner. Individual must be able to perform this task with minimal or no supervision. Technician must be capable and experienced to perform 91.411 and 91.413 inspections.lt;brgt;lt;brgt;Have a complete understanding of IFR ramp test equipment or equivalent.

lt;brgt;lt;brgt;The worlds leading manufacturer in aircraft is seeking skilled lt;stronggt;Sheet Metallt;/stronggt;lt;stronggt; Mechanicslt;/stronggt; at a Regional Maintenance facility located in Tucson, Arizona.lt;brgt;lt;brgt;Currently searching for technicians interested in contract and contract-to-hire positions to perform modifications and repairs upon commercial CRJ 200s, 700s, 900s, and

lt;brgt;lt;brgt;The worlds leading manufacturer in aircraft is seeking skilled lt;stronggt;A&&P Mechanicslt;/stronggt; at a Regional Maintenance facility located in Tucson, Arizona.lt;brgt;lt;brgt;Currently searching for technicians interested in contract and contract-to-hire positions to perform modifications and repairs upon commercial CRJ 200s, 700s, 900s, and Q400s.

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901