Job Listings

Description:Removes and installs aircraft subsystem assemblies and components such as engines, rotors, transmissions, mechanical flight controls and their components.All work is performed on UH-60 HelicoptersMonday-Friday 1st shiftTools are providedSkills & Qualifications:A &P not requiredSeeking 2+ years of UH-60 experienceIf interested, please apply or reach me directly at 843/972/

Aerotek Aviation is hiring Journeyman Electricians for a Sub-Contractor working at NASA Glenn Research Center. These candidates will be responsible for electrical installation, maintenance, and retro fitting of various equipment to set up testing equipment for the Aerospace Industry!

Description:Aerotek is currently hiring for A &P mechanics to perform line maintenance on Airbus Series of commercial aircrafts at our clients facility in Cleveland, OH.Duties:• Perform Line maintenance (On-call and scheduled) work on Frontier Airlines aircraft• Responsible for servicing, inspecting, and maintaining aircraft, aircraft engines, and associated components; effectively perform

Description:Aerotek is looking for sheet metal mechanics to start ASAP in Wichita, Kansas.

Aerotek, voted Best of Staffing, is hiring Wire Harness Assemblers to work with a local Aerospace company here in the Chatsworth area. These positions come with WEEKLY PAY, FULL BENEFITS, and the opportunity for overtime.Description:Wire Harness, cable assembly. Utilize small hand tools, crimping, wire stripping, wire cutters, etc.

Description:If you have experience working as an Overhaul or Repair Technician and youre looking for a new position ASAP, then this is the position for you.

Aerotek, voted Best of Staffing, is hiring Repair and Overhaul Technicians to work with a local Aerospace company here in the Carson area.

Description:If youre looking for a job ASAP and you have Aviation Repair Technician experience, then this is the role for you!An aerospace company in Carson is the who makes various aerosystems is looking for an Repair Techs and Overhaul Techs to join the team to perform maintenance, repair and alterations. Aerotek provides a rapid interview process so you start work as soon as possible!

FULL-TIME, CONTRACT TO HIRE POSITION HIRING URGENTLYLocation: Carson, CAPay Rate: $21.50 HourlyShift: 2nd Shift - 2:30pm - 11:30pm, M-FOverview:Aerotek Aviation is seeking Repair and Overhaul Technicians to perform repair on components and subsystems for Aircraft interiors.Products:

Description:2nd shift from 2:30- 11:30 PM with some OT If you have blueprint experience and working with hand and power tools then APPLY to this position.

If you have Repair Tech experience in Aerospace, we have multiple opening for a very popular leading Aviation companies in Van Nuys, CA that manufactures various components for Aerospace!. Location:Van Nuys, CaliforniaShift:1st Shift Monday - FridayPay:$18 -$19 hr.Description:

Immediately hiring for 1st and 2nd shift assemblers in the Lancaster, NY area. The assemblers will be responsible for handling various components related to aircraft oxygen systems in accordance to work instructions with a strong focus on quality. Performing routine set-up and testing of products and is responsible for following safety regulations.

Aerotek is currently looking for Assembly Operators in the Lancaster, New York area. Please apply and a recruiter will reach out within 24 business hours!What this position can offer you:

Description:***Candidates Must be Capable of Passing a Plate Test and flexible to work any shift***Aircraft Assemblers will be responsible for large structural assembly for the Air Bus 350 XWB, specifically the fuselage section. Aircraft Assemblers will be responsible for drilling and countersinking composite and metal parts.

Description:***Candidates Must be Capable of Passing a Plate Test and flexible to work any shift***Aircraft Assemblers will be responsible for large structural assembly for the Air Bus 350 XWB, specifically the fuselage section. Aircraft Assemblers will be responsible for drilling and countersinking composite and metal parts.

If youre interested in this position, please apply ASAP. Feedback is very quick once resume is submitted.If you have any question, please contact Kelli at 843/984/0500. Description:The A &P Mechanic must accurately repair and perform scheduled maintenance on all Cessna Citation Jets and some Gulfstream Aircraft, as well as perform inspections as required by the FAA.

Description:Aircraft Assemblers will be responsible for large structural assembly for the Air Bus 350 XWB, specifically the fuselage section. Aircraft Assemblers will be responsible for drilling and countersinking composite and metal parts. Aircraft Assemblers will be responsible for reading metric blueprints and following work instructions.

Description:Composite Technicians will be performing composite fabrication and rework for the Airbus A350 XWB aircraft. Duties include: Lays out, assembles, pre-fits, and bonds a variety of metal, compositor laminate fabrications, assemblies, parts, skins or equipment.

Description:Aerotek Aviation is looking for aircraft maintenance technicians to be part of their fun and supportive organization. You would perform maintenance on aircraft systems and sub-systems as directed.

Scope of Work: Contractors will be performing Modifications on CH-47 aircraft, aircraft mechanics will be modifying, fabricating and installing the new parts needed. They may be moved to different projects down the line as well. NO TOOLS REQUIRED!

***This position is located in Wichita, Kansas***Description:Structure Technicians will be working primarily on the sheet metal components and major structures performing modifications and assembly to Boeing 737but could be moving around to different sections to resolve/fix issues/rework.Environment is busy requiring flexibility in as well as ability to work independently providing support wher

Aerotek on behalf of its client, is seeking qualified A &P Mechanics to perform heavy maintenance on ATR turboprop aircraft. $40/hour DOE, per diem available/included. Long term opportunity (higher pay on our contract) or can do direct/permanent, if desired.

Description:Aerotek Aviation is looking for Aircraft Repair Technicians to perform phase maintenance and PMIs (phase maintenance Inspections on UH-60 aircraft in support of a FMS (Foreign Military Sales) government program.

Aircraft Maintenance Technician Contract to HireLocation: Wichita KSDescription:

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901