We are seeking for L4 Airframe or L3 Airframe Mechanics to work in Everett Washington send resume to firstname.lastname@example.org
Vinnell Arabia has multiple Aircraft Pneudraulic Technician positions available.Performs duties as an Aircraft pneudraulic technician. As an Aircraft Pneudraulics Repairer, you will inspect, service, and repair aircraft pneudraulics systems on Armyaircraft to ensure that they remain safe and ready to fly transport, patrol, and flight training missions.
Vinnell Arabia has multiple Machinist positions available.Performing duties as a metal worker in an aviation environment.
Aero Tech Services is located in Dallas, TX at Addison Airport and is seeking General Aviation Mechanics for Piston & Turbine Engine Airplanes & Helicopters to Include Beechcraft, Cessna, Cirrus, Piper, Robinson and All Tail Dragger Models. We are looking for Skilled Engine Mechanics for Continental, Lycoming, Pratt & Whitney Models.
A&P who knows Astars and high volume flying support needed for field work immediately. We#8217;re doing oil and gas exploration (seismic) and other work when that slows down. Day rate or full time works and of course we pay flight pay.Headquartered in California but the work is all over the map, literally.
Help bring research to life and drive your career forward with the National Research Council of Canada (NRC), Canada's largest research and technology organization.We are looking for a vibrant and dynamic Aircraft Maintenance Engineer- Mechanical to support our Aerospace Research Centre.
Motivated, licensed A P mechanic needed at Charleston Executive Airport. Position requires valid FAA A P license, IA a plus. Qualified candidates will have a min. 4 yrs experience providing routine and unscheduled maintenance for general aviation aircraft, including Beech, Piper, Cessna, and Cirrus.
Immediate opening for an Avionics technician at Charleston Executive Airport. The ideal candidate will have experience with installation, troubleshooting, and repair of avionics systems on GA aircraft to include Beechcraft, Cessna, and Piper aircraft. Knowledge of the latest avionics technology, integration and electronic theory is strongly desired.
Wanted experienced A&P/ IA Mechanic for maintenance of piston, turbine aircraft and warbirds.
Role:Lead System Engineer(Aerospace and Defence)Location:Windsor Locks CT Duration:6 months+ perform requirements development and thermo/fluid dynamic analyses to support the design, development, validation, verification, and operational support of ECLSS and ATCS hardware for a new vehicle design .
Assembly Tech Kinston NC6 months$20.00 - 23.00 ph (W2)Shift work involved Job Description : Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, and cables.
Aircraft Mechanic (Structures)Everett WA9 mos$20 - 23 ph (W2) Job DescriptionDrilling holes with pneumatic tools. Installing various types of fasteners (nuts, bolts, screws, solid & blind rivets). Locating parts by hand or utilizing detail tooling. Assembling parts.
Role:CONFIGURATION CONTROL ASSISTANTLocation: Philadelphia PADuration:6 months+EXPERIENCE:Three years of experience in the same or equivalent role QUALIFICATION:Experience in configuration control activitiesFamiliar with ENOVIA/CATIA/SAP SW and DATABASEUsage of Microsoft Office suite (including Access).
Title: Composite TechnicianLocation: Manassas, VADuration:6+monthsPay Rate: 35.00 per hourMust be a US Person Specific Responsibilities:
Role:Performance EngineerLocation:Independence OH 44131Duration:1 year+ Basic Qualifications Bachelor's degree in Mechanical or Aerospace Engineering • A minimum of 8 years of experience in analysis tools and techniques o 5 years of experience within the Aerospace industry; must include extensive experience in development of transport and / or military type aircraft • Demonstrated experience
Must have at least 3 years of aircraft fuel cell experience.Ability to become confined space certified for entry into aircraft fuel tanks with an opening of 10#8221;x16#8221;.Ability to read and interpret engineering drawings, technical manuals, understanding symbols, flags, and general notes.Ability to solve practical problems and deal with a variety of concrete variables in situations where o
Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed.
Lays out, fabricates, and assembles metalworking dies, molds, and machine tool fixtures by analyzing blueprints, sketches, models, and engineering or shop specifications.Uses a variety of machinist's hand tools and precision measuring instruments.Computes dimensions; determines machining and material or parts required.May perform precision work to exacting tolerances and dimensions; recommend r
Senior Mechanic (Testing Facilities)Torrance CA6 mos$45 ph (W2) Job Description:This position will assist in the test development lab facilities in the Torrance facility. Support will be provided in test floor utilization planning, installation and removal of equipment, energy sources such as electricity, hydraulics, pneumatics, liquid nitrogen, etc.
Aircraft AssemblerLocation: Costa Mesa, CA (98204)Duration: 6 - 9 mosPay Rate: $18 - 20 ph (W2)Job Description: Drilling holes with pneumatic tools. Installing various types of fasteners (nuts, bolts, screws, solid & blind rivets). Locating parts by hand or utilizing detail tooling. Assembling parts.
Role:EMI Test Engineer (aerospace)Location: Salt Lake City, UTDuration:6 months+This individual will be responsible for formulating the proper combination of testing and analyses to show compliance with customer requirements in these areas, including the preparation of supporting analyses and simulation, formulation of test plans, planning of the proper resources and facilities, execution of co
Description:Extensive avionics experience with performing: FMEA/FMECA,organizational level testability analysis, and Built-in Test (BIT) design andverification.A thorough understanding of the relationship ofthe testability analysis and FMEA.Extensive use of Microsoft Excel, includingmacro development.Avionics maintenance experienceAbility to develop diagnostics at the systemlevel-candidates mus
Aircraft Inspector (Machined Parts/Tools)Wichita KS3 mosDOE- $ ph (W2) Responsible for a wide range of inspection functions supporting supplier provided parts and assemblies, wire fabrication, weld, tubing, machining and tool fabrication and assembly. Follow programs, documents, drawings, specifications and quality standards to perform inspection functions.