Job Listings

Experience working on PT6 engines - teardown, etc

RWA Part 145 Repair Station is open 7 days per week 7:30 am #8211; 6:00 p.m. As an Aviation Maintenance Technician for RWA you will work as a member of a team accomplishing many different aspects of aircraft maintenance. This position reports to the Director of Maintenance. This is a full time position located at RWA headquarters in Bay City, WI.

Our client is hiring A&P Mechanics to work on several helicopters in a Part 145 Repair Facility in Philadelphia, PA. We are looking for talented individuals that have a passion for the aviation industry. This is a direct hire opportunity!

Duration 1 yearDescription Chipton-Ross is seeking a Cable and Harness Technician 2 for an opportunity in Melbourne, FL. RESPONSIBILITIES:Manufacture cable / harness products. Reads and interprets Work Instructions, schematics, wirelists, and drawings. Ensures quality of the hardware is maintained and company procedures are followed.

Structures Mechanic LAUNCH Technical Workforce Solutions is seeking a Structures Mechanic with commercial C&D check experience on Commercial aircraft for an opportunity in Indianapolis, Indiana.

Duration 6 monthsDescription Chipton-Ross is seeking a Line Maintenance Technician 2 for an opportunity in Melbourne, FL. RESPONSIBILITIES:Performs installation, maintenance, and repairs on electronic, networking and lab equipment and wiring.

Duration 9 monthsDescription Chipton-Ross is seeking an Electronics Technician 3 for an opportunity in Oklahoma City, OK. RESPONSIBILITIES:This position works closely with Engineering to configure and execute testing operations including troubleshooting equipment, setup, fixturing, testing, equipment maintenance, and documenting setup and test results.

Duration 9.5 MonthsDescription Chipton-Ross is seeking a Simulator Component Repair Technician B for an opening at Tyndall AFB, FL. RESPONSIBILITIES:Manages Depot-Level Repair Program in support of client's USAF F-15 Trainers program. Maintains trainer sub-assemblies by removing, replacing, repairing or upgrading components. Troubleshoots problems to isolate faulty components.

Duration 6 MonthsDescription Chipton-Ross is seeking a Tool Maker Associate for an opening in Grand Prairie, TX. RESPONSIBILITIES:Position involves dispositioning production tools to ship back to the owner or to scrap. Position is primarily tool repair, cleaning, crating, etc, but also involves basic warehouse/expediting tasks.

Duration 6 MonthsDescription Chipton-Ross is seeking a Maintenance Mechanic for an opening in Culpeper, VA. RESPONSIBILITIES:Lift 50lbs. climb ladders up to 15 ft, work overtime as required, service and repair of industrial equipment. automobile mechanical experience desired.

Duration 12 MONTHSDescription Chipton-Ross is seeking a Test Technician for an opportunity in Littleton/Waterton, CO. RESPONSIBILITIES:Performs a variety of duties in the electronic mechanical electromechanical or optical areas. Constructs troubleshoots calibrates adjusts tests and maintains equipment components devices or systems.

Description Chipton-Ross is seeking a Tool Maker for an openign in Palmdale, CA.

Duration 6 MONTHSDescription Chipton-Ross is seeking a Electronics Technician Maintenance I for an opportunity in Lexington, KY RESPONSIBILITIES:The Electronics Technician I applies basic technical knowledge to perform simple or routine tasks following detailed instructions, performs such tasks as building simple electronic equipment, fabricating wire harnesses and taking test readings using co

The Aircraft Inspection Authorization or Quality Inspectors have a great deal of responsibility and are expected to undertake things such as: - Performing 25hr, 50hr, 100hr and Annual Inspections- Performing logbook research and review- Compiling an AD compliance list- Verifying compliance with AD's- Reviewing documents related to the legal and safe operation of an aircraft- Completing and fili

Conducts daily aircraft flightline Electro-environmental operations as required.Troubleshoots malfunctions in aircraft electrical systems. Repairs, replaces, and rebuilds aircraft electricalsystems, such as LRU Component removal/installation. Sound knowledge of all associated electrical systemsupport equipment.

Conducts daily Non-Destructive Inspection (NDI) operations. Inspects structures,components and support equipment to detect cracks, delamination#8217;s, voids and heat damage using penetrant,eddy current, magnetic particle, radiographic, optical, and ultrasonic test equipment. Determines test methodand prepares fluids and parts for inspection.

Conducts daily flightline and backshop Low Observable operations. Repairs, modifies,fabricates and applies corrosion protective, low observable coatings and markings to aircraft structures,equipment, advanced composites and bonded structural parts.

CH-47 Avionics Technicians with 4 years of experience for a long-term contract in Huntsville, AL. This opportunity is a long-term with the possibility of going permanent if desired. The qualified candidates must be able to work 1st or 2nd shift depending on need.

A little bit about who we are#8230; We do a lot of cool stuff at ACI Jet. A lot of it is very serious, but we have a good time doing it. We like the work we do, the people we do it with, and who we do it for. We strive to be the best, no matter what we do, and to make sure we do it all at a standard that is second to none.

Our client, a global security and aerospace company, is principally engaged in the research, design, development, manufacture, integration and sustainment of advanced technology systems, products and services.

Coastal Aircraft Maintenance, Inc has provided a variety of aviation services to Corporate, Fractional Operators, and Airline industries since 2008.

Interior Mechanic - Oklahoma City, OK LAUNCH Technical Workforce Solutions is seeking Interior Mechanics with experience performing repairs on interior monuments, overhead bins, side walls and other interior related maintenance and repairs on commercial aircraft for an opportunity in Oklahoma City, OK.

SummaryThe Aviation Ground Support Equipment (AGSE) Mechanic will perform routine maintenance and inspections of various AGSE in support of the WASS/A contract. Will perform various aircraft field level and limited sustainment maintenance actions on various specialty equipment. Knowledge and use of special tools/equipment required to perform assigned tasks is mandatory.

Aircraft Painter LAUNCH Technical Workforce Solutions is seeking a Aircraft Painter with advanced knowledge of paint processes and products for an opportunity in Wichita, Kansas. Job Duties and Responsibilities: The Aircraft Painter works independently to safely prepare, paint and detail aircraft according to schedule using company quality standards and operating procedures.

SummaryThe maintaining of aircraft and their associated engines and sub-systems to ensure airworthiness.

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901