Job Listings

Aerotek is looking for a general production worker that will be responsible for the following: Knowledge of hand tools such as grinders and drills These production workers will be responsible for removing and replacing damaged panels on freight and galleys. All panels will be prefabbed so no fabrication is required.

lt;brgt;lt;brgt;lt;stronggt;Position Title:lt;/stronggt; Structures Mechaniclt;brgt;lt;brgt;lt;stronggt;Location:lt;/stronggt; Everett, WA or Renton, WAlt;brgt;lt;brgt; lt;brgt;lt;brgt; lt;brgt;lt;brgt;lt;stronggt;Job Description:lt;/stronggt;lt;brgt;lt;brgt;Repair of aircraft structural assemblies and components related to interior installs and rework on 737 and 767 aircraftlt;ulgt;lt;ligt;Rep

lt;brgt;lt;brgt;lt;stronggt;Position Title:lt;/stronggt; Structures Mechaniclt;brgt;lt;brgt;lt;stronggt;Location:lt;/stronggt; Everett, WA (Boeing plant)lt;brgt;lt;brgt;lt;stronggt;Duration:lt;/stronggt; 3+ months, opportunity for permanent if desiredlt;brgt;lt;brgt;lt;stronggt;Pay:lt;/stronggt; $28 - 32/hrlt;brgt;lt;brgt;lt;stronggt;Tools Requiredlt;/stronggt;: Nolt;brgt;lt;brgt;lt;stronggt;Ho

lt;brgt;lt;brgt;lt;stronggt;*This position is located in St. Louis, MO*lt;/stronggt;lt;br /gt;lt;br /gt;lt;br /gt;lt;br /gt;Below are details regarding this job, you can reach me, Gillian, at lt;stronggt;424-531-6074lt;/stronggt; if you meet the minimum requirements.

lt;brgt;lt;brgt; lt;brgt;lt;brgt; lt;brgt;lt;brgt;lt;stronggt;Position: Avionics Technicianlt;/stronggt;lt;brgt;lt;brgt;lt;stronggt; lt;/stronggt;lt;brgt;lt;brgt; lt;brgt;lt;brgt;Job Description:lt;ulgt;lt;ligt;Fabricate, assemble, and install aircraft avionic electrical systemslt;/ligt;lt;ligt;Troubleshoot avionic electrical schematicslt;/ligt;lt;ligt;Proficiency in blueprint or schematic read

lt;brgt;lt;brgt;lt;stronggt;Position: Aircraft Structures Technicianlt;/stronggt;lt;brgt;lt;brgt;lt;stronggt; lt;/stronggt;lt;brgt;lt;brgt; lt;brgt;lt;brgt;Job Description:lt;ulgt;lt;ligt;Aircraft modifications and Depot level maintenance on multiple airframeslt;/ligt;lt;ligt;Repair sheet metal, structures surfaces, and assemblieslt;/ligt;lt;ligt;Perform maintenance, overhaul, and repair of fix

lt;brgt;lt;brgt;Amazing DRONE UAV company!

lt;brgt;lt;brgt; lt;brgt;lt;brgt;lt;stronggt;Position: Avionics Technicianlt;/stronggt;lt;brgt;lt;brgt;lt;stronggt; lt;/stronggt;lt;brgt;lt;brgt; lt;brgt;lt;brgt;Job Description:lt;ulgt;lt;ligt;Fabricate, assemble, and install aircraft avionic electrical systemslt;/ligt;lt;ligt;Troubleshoot avionic electrical schematicslt;/ligt;lt;ligt;Proficiency in blueprint or schematic readinglt;/ligt;lt;li

lt;brgt;lt;brgt;Position: Aircraft Structures Technician lt;br /gt;lt;br /gt;lt;br /gt;Job Description: lt;br /gt;* Aircraft modifications and Depot level maintenance on multiple airframes lt;br /gt;* Repair sheet metal, structures surfaces, and assemblieslt;br /gt;* Perform maintenance, overhaul, and repair of fixed wing structureslt;br /gt;* This position is in support of PC-12, U-28, C130, a

lt;brgt;lt;brgt;lt;br /gt;lt;stronggt;*This position is located in St. Louis, MO*lt;/stronggt;lt;br /gt;lt;br /gt;lt;br /gt;lt;br /gt;Below are details regarding this job, you can reach me, Gillian, at lt;stronggt;424-531-6074lt;/stronggt; if you meet the minimum requirements.

lt;brgt;lt;brgt;Mechanical Tech working robotic systems lt;brgt;lt;brgt;- Hydraulics pneumatic included lt;brgt;lt;brgt;- Mechanical Systems assebly lt;brgt;lt;brgt;- Mechanical Aptitudelt;brgt;lt;brgt;- Blueprint reading lt;brgt;lt;brgt;Starting pay is 23-24/hr.lt;brgt;lt;brgt; lt;brgt;lt;brgt;If interested please send an updated resume or call 303-224-4553 lt;brgt;lt;brgt;lt;br /gt; lt;brgt;l

lt;brgt;lt;brgt;lt;stronggt;Currently hiring:lt;/stronggt;lt;ulgt;lt;ligt;lt;stronggt;Sheet Metal Mechanicslt;/stronggt;lt;/ligt;lt;ligt;lt;stronggt;Avionics Technicianslt;/stronggt;lt;/ligt;lt;ligt;lt;stronggt;Aircraft Mechanicslt;/stronggt;lt;/ligt;lt;/ulgt;lt;brgt;lt;brgt;lt;stronggt;Location:lt;/stronggt; Centennial, Co.

*First shift- starting at 5 AM or7 AM*5- 10 hour shifts*MUST have own tools*Mechanical Aptitude*Basic math skills*Contractors will be setting up and operating shot peening machines. They will receive a process sheet and then adjust the fixtures and nozzles on the machine based off the directions on the sheet. About Aerotek: We know that a companys success starts with its employees.

lt;brgt;lt;brgt;lt;stronggt;**This position is in Columbus, GA**lt;/stronggt;lt;brgt;lt;brgt; lt;brgt;lt;brgt;lt;stronggt;Responsibilitieslt;/stronggt;lt;ulgt;lt;ligt;Will be responsible for repairing/overhauling Engines Enginelt;/ligt;lt;ligt;They will be put on one aspect of the engine repair (i.e.

Trimmer LAUNCH Technical Workforce Solutions is seeking a Water Strider for an opportunity in Auburn, Washington.

Firehawk Helicopters has an opening for Black Hawk Mechanics. Company
has positions at its Boise, ID and Leesburg, FL bases. The position
includes Field and Hangar maintenance, as well as travel during the
active Fire Suppression season. Firehawk pays competitive hourly rate
with overtime during the Fire Suppression season. Travel schedule

Horizon Aviation is seeking an A P with IA privileges to join its busy maintenance department in Providence, RI. A candidate must have at least eight years of experience maintaining piston aircraft, attention to detail, a dedicated adherence to FAA regulations, and a thoughtful approach to their craft. Prior experience supervising junior mechanics is a plus.

  • Ability to effectively use hand/power tools common to the manufacturing of aircraft sheet metal and structural parts
  • Ability to use precision measuring instruments
  • Ability to read and interpret blueprints, specifications, charts and tables
  • Ability to effectively use intermediate shop math

lt;brgt;lt;brgt;Under the direction of the Production Shop Supervisor, the Gear Technician services aircraft landing gear components through troubleshooting, diagnostic testing, and parts replacement at the component/depot level using manuals and other data. This position requires strong mechanical ability and great attention to detail.

Aerotek is currently looking to hire qualified A &P mechanics for their client in St. Louis, MO.Job Description:

  • A &P Mechanic working on EMB 135,145, 170,175, 190 and CRJ 200,700, 900s; Line mx during the day or overnight mx items.

Work Environment:

Aerotek is currently looking to hire qualified A &P mechanics for their client in St. Louis, MO.Job Description:

  • A &P Mechanic working on EMB 135,145, 170,175, 190 and CRJ 200,700, 900s; Line mx during the day or overnight mx items.

Work Environment:

lt;brgt;lt;brgt;Primarily will be working on Airbus A321, MD 80, and B737.lt;br /gt; lt;br /gt; * Layout, fabricate, assemble, mate, install, check or troubleshoot and repair production and prototype aircraft structures, parts and mechanical assemblieslt;br /gt; * Read and interpret information from mechanical/structural, blueprints, planning, process specifications, diagrams, engineering drawi

HIRING FOR SKILLED FUEL CELL MECHANICS TO WORK WITH A WELL KNOWN AVIATION COMPANY IN SAN ANTONIO!Candidates will be working with Fuel Systems on Military Jets!Position: Fuel Cell MechanicShift: M-F 5:30am-2:30pm Qualifications: 2-4 years of experience working with Aircraft Fuel Systems (preferably with military jets)Job Description: Perform assembly and disassembly operations on aircraft fuel s

AEROTEK IS HIRING SKILLED STRUCTURES MECHANICS TO WORK WITH A NOTABLE AVIATION CLIENT IN SAN ANTONIO! Must be able to obtain a security clearance. Will be working on military jets.Position: Structures MechanicSchedule: 1st Shift Monday - Friday 5:30am - 2:30pmQualifications:

lt;brgt;lt;brgt;lt;stronggt;Hiring: lt;emgt;Sheet Metal Mechanicslt;/emgt;lt;/stronggt; // New project lt;brgt;lt;brgt;lt;stronggt;Location: lt;/stronggt;San Antonio, TXlt;brgt;lt;brgt;lt;stronggt;Pay: lt;/stronggt;$23.94/Hr.lt;brgt;lt;brgt;lt;stronggt;Duration: lt;/stronggt;Long Term Contract with the ability to go directlt;brgt;lt;brgt;lt;stronggt;Work Environment: lt;/stronggt;lt;ulgt;lt;lig

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901