Job Listings

STi currently has positions available at Joint Base McGuire-Dix-Lakehurst, McGuire AFB, NJ, United States 08641-0000. at the commander naval air forces reserve fleet logistics support wing (FLSW) centralized repair facility (CRF) performing Organizational (O-Level) and Depot (D-Level) Maintenance Support functions on the C/KC-130T.

STi currently has positions available at Joint Base McGuire-Dix-Lakehurst, McGuire AFB, NJ, United States 08641-0000. at the commander naval air forces reserve fleet logistics support wing (FLSW) centralized repair facility (CRF) performing Organizational (O-Level) and Depot (D-Level) Maintenance Support functions on the C/KC-130T.

PDS is seeking a QC Inspector II for an open position in Savannah, GA.In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Principal Duties and Responsibilities:

Type of aircraft: Commuter #8211; Dash 8Longevity: 6+ monthsType of work environment: Part 145 repair stationSummary

Very Urgent Job Opportunity!Serious and experienced A P MechanicAirframe Powerplant.

Very Urgent Job Opportunity! Serious and experienced A P Mechanic Airframe Powerplant. Lear Jet Dassault Falcon JetGulfstreamCitationBombardierHawker BeechcraftEmbraer, etc. Aircraft Mechanics! Only Serious Candidates Need to Apply! Please send an updated copy of your resume in a Word Document Immediately!

AOG Technician AOG Mechanic MRU TechnicianMRU Mechanic *****MUST HAVE CORPORATE JET EXPERIENCE***** Contract to direct - Direct hire opportunity :Perform required airframe and powerplant maintenance, avionics service, troubleshooting and/or repairs needed on CORPORATE JETS.Ensure all documents are signed off completely, properly and timely in accordance with Repair Station Quality Control Manua

AOG Technician AOG Mechanic MRU TechnicianMRU Mechanic Contract to direct; direct hire opportunity :Perform required airframe and powerplant maintenance, avionics service, troubleshooting and/or repairs needed on CORPORATE JETS.

General Accountability: Performs visual, dimensional, in-process and final inspection on engines, accessories and related components and parts to determine their condition for return to service and verify correct completion in accordance with approved data and customer requirements. Responsible for the certification of products, on behalf of the company, for return to service.

General Accountability:Maintains, repairs, and overhauls aircraft engines, modules, components and accessories to assure compliance with established company standards, contractual obligations and airworthiness regulatory requirements. Performs technical troubleshooting using mechanical ability and extensive product knowledge.

A P Mechanics will need an A P license and their own A P Tools. A P Mechanics will perform Heavy Maintenance (C-Checks, D-Checks, Heavy Checks) associated with a Part 145 Repair station. Entry Level A P Mechanics who have graduated from school within the past 24 months will be accepted.

ZENETEX specializes in management and technology support services for a variety of federal agencies and commercial organizations. We have an opportunity for an Aircraft Mechanic II to support our Contractor Field Team at Whiteman AFB, MO. This position will perform organizational and intermediate level Low Observable Maintenance repair of B-2 aircraft LO system.

Position Purpose:The Sheetmetal Technician Senior works under minimal supervision to safely lay-out, fabricate and install parts equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

High School Diploma or GED required. 6 years technically related experience required. 1 year NDT experience on aircraft supporting airworthiness decisions required. Proficiency in blueprint reading/interpretation and shop mathematics required. MAUS-V, Omni-Scan, hardness testing experience preferred. NDT Level II Certification in all five (5) disciplines required. Documentation is required.

Aviation Maintenance Technician - Avionics (Aviation Maintenance Technician II #8211; Avionics) Job Summary: The Aviation Maintenance Technician - Avionics Shop performs maintenance including but not limited to inspection, test, and repair of aircraft avionic/electronic components in an avionics bench repair environment in accordance with Delta approved manuals and methods.

Aircraft Test Technician LAUNCH Technical Workforce Solutions is seeking an Aircraft Test Technician with experience performing electrical and avionics related maintenance and aircraft modifications on commercial aircraft for an opportunity in San Antonio, Texas. Job Duties and Responsibilities: Fly each airplane on the ground through testing of all systems and aircraft functions.

An A P Maintenance Mechanic supports the daily needs of the maintenance operations of the customer, and ensures an outstanding experience by providing top level service at Pentastar Aviation. Responsibilities:

  • Perform inspections, repairs, overhauls to helicopter dynamic components.
  • Perform inspections, repairs, services, and overhaul to helicopter dynamic components.
  • Keep tool control and maintain work area clean all the time.
  • Work in the SAP computer system regarding sign offs and logging time on jobs.
  • Perform inspections, repairs, services, and overhaul to helicopter dynamic components.
  • Keep tool control and maintain work area clean all the time.
  • Work in the SAP computer system regarding sign offs and logging time on jobs.
  • Assigning tasks/jobs to the technicians working on the aircraft
  • Work with Completions Engineer and Program Manager to define parts required for the completion and assist Spares when necessary with ordering parts
  • Perform inspections, repairs, services and modifications to helicopter airframe and engines
  • Work in SAP regarding sign offs and logging time on jobs
  • Move and position aircraft in the hangar and on the flight line
  • Clean up work area at the end of shift

Job Responsibilities: Examine and inspect aircraft components, including landing gear, hydraulic systems, and deicers to locate cracks, breaks, leaks, or other problemsConduct routine and special inspections as required by regulationsInspect completed work to certify that maintenance meets standards and that aircraft are ready for operationRead and interpret maintenance manuals and FAA/manufact

Be a part of a fortune 500 Combat Systems group and a global leader in the design, development, production, support and enhancement of tracked and wheeled military vehicles. Our client has a 70 year defense heritage of providing a full spectrum of high quality, technically superior, high value products and services to the United States and its Allies.

Type of aircraft: HelicopterLongevity: Temp to PermType of work environment: Manufacturing Summary

Type of aircraft: Corporate - Cessna Citation, Conquest, Falcon, Hawker, Challenger and Learjet aircraft. Longevity: Long TermType of work environment: MRO Description: Perform general avionics support items on aircraft. This shall include, but not be limited to items such as removal and installation of panels and components and repair work.

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901