Job Listings

lt;brgt;lt;brgt;***THIS POSITION IS LOCATED IN SHREVEPORT, LA***lt;brgt;lt;brgt;***THIS POSITION IS LOCATED IN SHREVEPORT, LA***lt;brgt;lt;brgt;***THIS POSITION IS LOCATED IN SHREVEPORT, LA***lt;brgt;lt;brgt;lt;stronggt;Please call Joe at (424)531-6115 if you would like to be considered for this position. The job description is included below.

lt;brgt;lt;brgt;lt;stronggt;$28.00/hour - Ovetime: $42.00/hourlt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;$2,000/week 60 hours lt;/stronggt;lt;ulgt;lt;ligt;lt;stronggt;Per diem split: $14 taxed + $14 untaxed $28.00lt;/stronggt;lt;/ligt;lt;ligt;40 to 56 hours: $28 taxed + $14 billable per diemlt;/ligt;lt;ligt;+56 hours: $42.00/hour taxedlt;/ligt;lt;/ulgt;lt;brgt;lt;brgt;Job Description:lt;ulgt;lt

lt;brgt;lt;brgt;- Assists in setup and performance of various development, acceptance, and qualification test of aerospace hardware such as aircraft air distribution ducting and launch vehicle propulsion system components per written test procedures and laboratory supervisors directionlt;br /gt;lt;br /gt; - Assists in the setup and operation of mechanical testing apparatus and equipment, as dir

lt;brgt;lt;brgt;lt;stronggt;JOB DESCRIPTIONlt;/stronggt;lt;br /gt;lt;br /gt;The QC Inspector is responsible to the Director Quality && Chief Inspector and reports directly to the Supervisor of Quality Control.

lt;brgt;lt;brgt;Our client is a growing company that is searching for an extremely driven Repairman to join their team.lt;brgt;lt;brgt; lt;brgt;lt;brgt;lt;stronggt;Repairman Summary lt;/stronggt;lt;brgt;lt;brgt;* The repairing of damaged pallets that weighs 75 to 85 lbs.

lt;brgt;lt;brgt;-Structures Mechanics and A&&P Mechanics will be performing heavy maintenance on EMB 135,145, 170,175, 190 and CRJ 200,700, 900slt;brgt;lt;brgt;-Long Term Contractlt;brgt;lt;brgt;-10-20 hours of overtime a weeklt;brgt;lt;brgt;lt;stronggt;Qualificationslt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;-lt;/stronggt;Requires at least 4 years experience, may consider candidates with

lt;brgt;lt;brgt;Performs skilled technician work that involves diagnosis, replacement, repair and rebuilding of oxygen tanks / systems for Aircraftslt;br /gt;* Uses diagnostic equipment and a variety of tools specific to the trade. Applies principles and practices of electrical and electronics theory.

lt;brgt;lt;brgt;POSITION DESCRIPTIONlt;br /gt;We are searching for Aircraft Maintenance Technicians to perform services to their customers aircraft in accordance with FAA/JAA regulations in a Part 145 Repair Station environment.

lt;brgt;lt;brgt;lt;stronggt;Job Description:lt;/stronggt;lt;brgt;lt;brgt;Candidates will be responsible for the assembly and fitting of detail parts and structures and varied drilling and riveting operations; ensure parts and assembly meet shop requirements.lt;br /gt;Rivet structural assemblies and parts using all tools required to do the job (e.g.

lt;brgt;lt;brgt;$28/hr OT $42/hrlt;brgt;lt;brgt;Qualifications:lt;ulgt;lt;ligt;A&&P license (Not required for Avionics or Structures Positions)lt;/ligt;lt;ligt;Experience on Wide body Aircraftlt;/ligt;lt;ligt;5 years Aviation experience lt;/ligt;lt;ligt;Toolslt;/ligt;lt;/ulgt;lt;brgt;lt;brgt;Job Description:lt;ulgt;lt;ligt;Perform functions assigned in the service, repair, and overhaul

lt;brgt;lt;brgt;We are currently seeking A&&P mechanics for hangar maintenance performing maintenance on corporate aircraft.lt;brgt;lt;brgt;Job Summary: lt;brgt;lt;brgt;A&&P mechanics will be doing hangar maintenance, phase inspections, and repairs on narrow body and wide body aircraft.

lt;brgt;lt;brgt;Line Maintenance on 767 cargo aircraft that are used for Amazon Air operations at SAClt;brgt;lt;brgt;lt;br /gt; lt;brgt;lt;brgt;lt;br /gt; lt;brgt;lt;brgt;lt;br /gt; lt;brgt;lt;brgt;lt;stronggt;About Aerotek:lt;/stronggt;lt;stronggt; lt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;We know that a companys success starts with its employees.

lt;brgt;lt;brgt;Looking for an experience NDT.lt;brgt;lt;brgt;Need a technician who is familiar with Ultrasonic level II immersion.lt;brgt;lt;brgt;Performing NDT testing on Aviation Aircraft Components so will have to be familiar with aviaiton.lt;brgt;lt;brgt; lt;brgt;lt;brgt;Pay will depend on experience.lt;brgt;lt;brgt; lt;brgt;lt;brgt; lt;brgt;lt;brgt;lt;br /gt; lt;brgt;lt;brgt;lt;br /gt; lt

lt;brgt;lt;brgt;Line Maintenance and modifications on Frontier Airlines A320s and A321s and Sky Lease (Cargo) B-747-400slt;brgt;lt;brgt;lt;br /gt; lt;brgt;lt;brgt;lt;br /gt; lt;brgt;lt;brgt;lt;br /gt; lt;brgt;lt;brgt;lt;stronggt;About Aerotek:lt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;We know that a companys success starts with its employees.

lt;brgt;lt;brgt;RESPONSIBILITIES: Install and repair all avionics systems in a efficient and safe manner. Individual must be able to perform this task with minimal or no supervision. Technician must be capable and experienced to perform 91.411 and 91.413 inspections.lt;brgt;lt;brgt;Have a complete understanding of IFR ramp test equipment or equivalent.

lt;brgt;lt;brgt;***THIS POSITION IS LOCATED IN SHREVEPORT, LA***lt;brgt;lt;brgt;***THIS POSITION IS LOCATED IN SHREVEPORT, LA***lt;brgt;lt;brgt;***THIS POSITION IS LOCATED IN SHREVEPORT, LA***lt;brgt;lt;brgt;lt;stronggt;Please call Joe at (424)531-6115 if you would like to be considered for this position. The job description is included below.

lt;brgt;lt;brgt;Client is looking for 1 quality inspector that has 3+ years of aircraft component inspection, soldering component inspection and mechanical and plastic fixture inspection experience.

lt;brgt;lt;brgt;Aerotek is looking 20 CNC set up machinists for a growing aerospace manufacturer in Anaheim.lt;brgt;lt;brgt;These are direct placement openings offering both 1st and 2nd shift with weekly overtime.lt;brgt;lt;brgt;lt;stronggt;Job Dutieslt;/stronggt;lt;ulgt;lt;ligt;1-2 set-ups per day on Mazak machineslt;/ligt;lt;ligt;Clean environment with 110 CNC machineslt;/ligt;lt;/ulgt;lt;brg

lt;brgt;lt;brgt;lt;stronggt;Licensed A&&P Mechanics and Non-Licensed structures mechanicslt;/stronggt; needed to work on EMB 135,145, 170,175, 190 and CRJ 200,700, 900s for regional airline.lt;brgt;lt;brgt;C-Checks maintenance during the day or overnight maintenance items.

lt;brgt;lt;brgt;lt;stronggt;Position: Sheet Metal Mechanics and Avionics Technicianslt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;Pay: $28 - $33.50 / hourlt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;Bridgewater, VAlt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;4 Years min.

lt;brgt;lt;brgt;NOW HIRING ENTRY LEVEL A&&P MECHANICS!!lt;brgt;lt;brgt;Great company to gain experience from. They will accept entry level candidates as long as you have your airframe and powerplant license.

lt;brgt;lt;brgt;A && P Mechanics will perform all areas of aircraft repairs and alterations to General Aviation aircraftlt;br /gt;lt;br /gt;Typical duties will include but are not limited to the following:lt;br /gt;lt;br /gt; - Performs assembly, disassembly, service, and repairs required in the completion of aircraft annuals / 100hr inspections of both Single and Multi-engine piston dr

lt;brgt;lt;brgt;lt;br /gt;Under close supervision, the Avionics modification Specialist installs, troubleshoots, and repairs aircraft wiring and avionics systems using various hand tools and test equipment to meet manufacturing specifications, approved procedures, FARs industry standards in a safe, clean, and organized work area.lt;br /gt;Under close supervision, performs basic routing of wirin

lt;brgt;lt;brgt;lt;stronggt;Job Descriptionlt;/stronggt;lt;brgt;lt;brgt;Candidates must be able to perform assembly, fitting, and fabricating parts and composites. Varied drilling and riveting operations will be required to ensure parts and assembly meet shop requirements. Must be able to perform work such as honeycomb, bonding, cavaliers, and fiberglass.

lt;brgt;lt;brgt;lt;stronggt;PRATT AND WHITNEY IS SEEKING 5 ENGINE INSPECTORS IN THE OKC AREA!lt;/stronggt;lt;brgt;lt;brgt;lt;stronggt;Position:lt;/stronggt; Engine Inspectorlt;brgt;lt;brgt;lt;stronggt;Location:lt;/stronggt; Oklahoma City, OKlt;brgt;lt;brgt;lt;stronggt;Job Description:lt;/stronggt; The Engine Inspector will have the responsibility for inspection tasks per Approved Technical Data

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901