Job Listings

Actively hiring for Mechanically Inclined Candidates for Aviation company in Lenexa area!Job Description:This is an assembly job in the aviation industry.

Aerotek is currently looking for Assembly Operators in the Lancaster, New York area. Please apply and a recruiter will reach out within 24 business hours!**Must be able to provide physical education documents**What this position can offer you:

Description:The A &P Mechanic is responsible to perform heavy maintenance (C & D checks) and aircraft modifications in an Heavy Maintenance / MRO work environment.

Description:The Interiors Assembler is responsible to perform aircraft interior installs and removals of seats, galleys, lavatories, etc.

Aerotek is hiring Avionics Technicians in Lake Charles, Louisiana. *Must Hold Active Secret Clearance*Qualified candidates must have at least seven years of troubleshooting, repair, performing maintenance on aircraft electrical systems. Pay Rate: $45/h - $56/h Based On Experience Must be open to shift About Aerotek:We know that a companys success starts with its employees.

CORPORATE A &P MECHANIC IN THE HOUSTON, TX AREADescription:Aerotek is looking for a corporate A &P mechanic to start immediately in Sugarland, TX.Experience on Gulf-stream, Citation, King Air and or Challenger air frames preferred but will also consider small CRJ experience as well. Performing scheduled and unscheduled maintenance on Corporate jets.

Description:Primary duties will be disassembling aircraft landing gear to be repaired & refurbished. - disassembly entire landing gear unit- clean & repair landing gear components - assemble repaired & refurbished landing gear & all of its componentsNeed a strong hands-on mechanical experience.

We are looking for A &P mechanics to work on Global and Challenger.Position is in the heart of Dallas, Texas!

Description:We are currently seeking A &P with corporate or regionalaircraft experience Airframe License is required 1st shift 7:30-4:00pm2nd shift 4:00pm-12:00am 10 shift diffWeekend shift Fri- Sun 12hours shifts 7a-7p 15 shift diffMust have valid drivers licenseBenefits paid 100 for single plans5 401k matchPaid vacation and paid sick days are eligible after 60 days of employment.

Aircraft AssemblerContractDescription:Our client is seeking Aircraft Assemblers with experience with aircraft sheet metal, structures or avionics.

Aerotek Aviation is currently looking for licensed Airframe and Powerplant mechanics for a client of ours out in Grand Rapids, MI.DescriptionPerforming maintenance on Lear 45/75, Citation line, King Air, or Pilatus. They will be phasing out Pilatus at some point. Airframe and powerplant technician generally inspects, repairs, overhauls, upgrades and cleans aircraft.

FULL-TIME, CONTRACT-TO-HIRE WITH INTENT TO GO PERMANENTLocation: Glendale, CA Pay Rate: $25.00 - 30.00 HourlyShift: 1st Shift: 7PM - 4PM, M-FOverview:Aerotek Aviation is seeking Hydraulics assembler for a repair station/OEM manufacturer to assemble and repair hydraulic and hydro-electric components.Product Worked On:

Aerotek is currently looking for Avionics Technicians in the Georgetown, Delaware and surrounding areas. Per Diem is given to those Relocating! Please apply and a recruiter will reach out within 24 business hours!What this position can offer you:

Aerotek is currently looking for Aircraft Interior Mechanics in the Georgetown, Delaware and surrounding areas. Per Diem is given to those Relocating! Please apply and a recruiter will reach out within 24 business hours! **Must have VIP Aircraft Interiors experience**What this position can offer you:

Hiring a Lead Avionics Mechanic (AOG)- responsible for repairing all company aircraft Maintenance Issues with an emphasis on avionics systems and wire repair. Consistently demonstrates a high degree of expertise in troubleshooting and repairing aircraft mechanical and electrical systems.

Description:Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft. Access and re-install aircraft components, which obstruct the performance of assigned tasks.

Description:Electronic Technician works under close direction/supervision and is responsible to test,troubleshoot, repair, and modify production of electronic or mechanical products, parts, equipment andsystems, such as computer equipment, instrumentation, digital / analog, electronic products, testequipment, electro-mechanical products, applying principles and theories of electronics, electric

Description:Perform such typical maintenance operations as the removal and replacement of aircraft and powerplant components that require bolting, torqueing, adjusting, rigging and safety wiring to include powerplant removal/installation.Must be able to work on A320, A330, and A380 engines.Read and utilize blueprints, maintenance manuals, ATA codes, illustrated parts catalogs, service bullet

A Powerplant license is NOT required for this position, however any level of experience will be considered as long as you have the license. We are hiring powerplant engine mechanics with previous experience and entry level. Candidates that do not have there powerplant license must have previous hands on engine experience to be considered or 2+ years of aviation experience.Description:

Aerotek on behalf of its client, is seeking an Aircraft Inspector for the Boeing 787 rework project in Everett, WA. This is a long term contract position, per diem available. Must have 5+ years on-aircraft experience.

An aircraft maintenance company at the Cincinnati/Northern Kentucky airport is looking for A &P Mechanics. Entry Level pay is $30/hr. Pay up to $40/hr based on experienceWork will entail line maintenance and A checks on Boeing cargo aircraftCandidates must have an A &P license and prefer Boeing experienceThis is a contract to hire position.

Aerotek Aviation is currently hiring a 1st and 2nd shift repair technician to perform maintenance on FAA regulated, refrigerated cargo shipping containers.Description:Perform testing/troubleshooting/repair of FAA approved temperature controlled containers. Managing the warehouse and material movement. Patching holes on cargo containers.

FULL-TIME, DIRECT PLACEMENT OPPORTUNITY HIRING URGENTLYLocation: Edwards AFB (Southern California) Pay Rate: $40.00 HourlyShift: 1st Shift: 7AM - 3:30PM, M-F, OT offered at end of shift/weekendsOverview:Aerotek Aviation is seeking Avionics Technicians to work in the instrumentation department on Edwards AFB, doing repair, troubleshooting, and overhaul on multiple Fighter airframes.Airframes:

Description:Will inspect incoming, outgoing parts, articles, materials and documents with FAA guidelines.Inspect incoming and outgoing raw materials.Will be making kits- assembly of the components.Tracking and maintaining shipments with SAP.Working with aircraft and aerospace parts.Using micrometers and calipers to measure parts to make sure they match the print.If part does not conform- will h

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901