MUST HAVES:1. Minimum 1 year of aircraft sheetmetal or composites assembly experience 2. Must have experience in basic aircraft structural experience such as riveting and lay out work3. Experience in aerospace composites **open to military, fixed wing background4. Must be open to working OT5. Must have own basic toolspreferred: 1. Helicopter background is preferred but not required.
Our client is looking for 3 Helicopter A&P Mechanics for their Philadelphia, PA Location. This position reports to the Director of Maintenance and is responsible for working on complex aircraft and systems primarily in the rotary wing industry. Our client is open to entry level to senior level candidates. All candidates must have a valid A&P License. Must Haves:
JOB DESCRIPTION: Looking for A&Ps that have 2-5 years of recent experience performing line maintenance and heavy checks on their required corporate airframe products.Experience working on gulfstream, citations, lears, challengers, and hawkers required.QUALIFICATIONS:
Our client is currently looking for Avionics Technicians at their New Castle, DE location. Candidates will be maintaining and installing avionics systems within Company procedures along with following F.A.A. and F.C.C. requirements. MUST HAVES:
Looking for Technicians to troubleshoot and repair monorails at EWR Airport.Technicians will perform overhaul tasks and activities as defined by the Project Manager. Perform installations and necessary inspections as well as testing to ensure that the assigned work scope is properly integrated and meets defined requirements.
- Rebuild/re-manufacture of heavy-lift helicopters used for firefighting, logging, etc.
- This is a full tear-down and rebuild that requires a comprehensive knowledge of blueprints, heavy structural mods and repairs, all types of rivets and fasteners, and some basic fabrication.
An aircraft cargo company in Erlanger, KY is looking for A&P mechanics. Work will entail line maintenance on Boeing and Airbus aircraft. Candidates must have A&P license and at least 2 years of recent A&P experience. Boeing or Airbus experience is required This is a contract position paying 25/hr About Aerotek:We know that a companys success starts with its employees.
A Regional airline at the Cincinnati/Northern Kentucky Airport is looking for A&P mechanics. Work will entail overnight hangar maintenance on Embraer aircraft. Candidates must have an A&P License. At least 1 year of experience is preferred. This is a 4 month contract to hire position.
Client is looking for an electrical solderer assembler with 1-2 years of aircraft assembly, and soldering experience on electronic boards.This position requires the candidate to connect the wiring to the avionic boards prior to installation onto the corporate jet aircraft. The candidate will have to be experienced in performing the day to day duties for these boards.
- Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and subassemblies such as modules, boards, panels, drawers, frames, hydraulics, and cables.
- Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws.
JOB DESCRIPTION:A world well-known aviation company is looking for A&P Mechanics to perform maintenance on regional MD- 11 Boeing 737 aircraft. Will be required to have their own tools.WORK ENVIRONMENT:Will be working in a hanger at the at SHV airportQUALIFICATIONS:
Aerotek is currently hiring for qualified Avionics Technicians to for our client in Colorado Springs! Job Description:
We are one of the largest aircraft manufacturers in the world by focusing on specific market segments with high growth potential in commercial, defense, and executive aviation.
Avionics Technicians will be working on AW609 tilt rotor aircraftInstall, troubleshoot and repair electrical wiring and avionics equipment on AW609 experimental tilt rotor.ASSIGNED DUTIES: * Read and interpret wiring diagrams* Coordinate with Shift Lead and Engineering on changes to blueprints and diagrams* Run and Mark wire to install complex wiring and electrical systems* Perform routine chec
Our client located is looking to hire a Corporate A&P mechanic to perform maintenance on their Corporate Aircraft. They will be performing scheduled maintenance that varies from light bulb changes, tire changes to engine changes. Also, performing routine maintenance on Corporate Aircrafts. Perform aircraft post flights and inspections.
Pay Rate: 35.50Per Diem Split: 23 taxed, 12.50 untaxedRESPONSIBILITIES:
- Modifications to wing and other parts of a high altitude aircraft
- Use of applicable sheetmetal skills including but not limited to fabrication, modification, and installation per blueprint
- Position requires candidates to have their own tools shadowed
An established company that provides services to locations throughout the United States is actively seeking a qualified field service technician in the Lubbock, TX and Midland, TX areas.The field service technician will be responsible for planning and coordinating scheduled maintenance at various airport locations and land entry points throughout the Lubbock, TX, Midland, TX area and surroundin
An aerospace company located in Los Alamitos in Orange County, CA near Los Angeles is currently seeking qualified inspectors.The inspectors will perform receiving inspections, first-article and final inspections as well as other related inspection duties with aerospace parts, assemblies, sub-assemblies, components and sub-components. The aerospace inspector will prepare rework tags.
Our client is looking for qualified Avionics Technicians to work a long term contract in Shreveport, LA! Job Details:The Avionics Technician is responsible to perform functions assigned in the service, repair, and overhaul of aircraft and aircraft components, parts and accessories, in which they will be qualified and appropriately certificated for the work performed.Qualifications:
Aerotek is currently hiring Avionics technicians, Sheet metal mechanics and A&P mechanics for immediate employment for their client located in Bridgewater, VA. This is due a few recent contract that were awarded that will involve individuals to perform heavy maintenance work on King Airs, Dash-8s and Beech1900s.Schedule: Monday-Friday 6AM-5PMQualifications:
JOB DESCRIPTION:A highly recognized aerospace organization in the Lakeland, FL area is looking for experienced avionics installer. Will be working as an avionics technician doing installs on general aircrafts. Working performing maintenance and alterations of aircraft installations such as; Garmin, aspen, S-Tec, Nav/Com, GPA and Auto pilot systems. QUALIFICATIONS:
gt;gt;gt;gt; HVAC Helper Needed in Bessemer lt;lt;lt;lt;lt; Our client is in need of 1 HVAC Sheetmetal Mechanic HelperTheir primary role will be the following:Fabricate, assemble, install and repair sheet metal products and equipment.The equipment that you will have to repair are ducts primarily, but other tasks may be added throughout the day.This is a contract to hire opportunity and can star
Aerotek is currently seeking several UH-60 "Mike" Model Aircraft Mechanics to support phase maintenance for a premier and well established client in Huntsville, Alabama.Qualifications:
The project will involve performing heavy structural modifications on corporate and military aircraft. RESPONSIBILITIES:
Job Description:A&P Mechanic for hangar maintenance performing maintenance, phase inspections, and repairs on narrow body aircrafts (lears) and widebody aircrafts (global and challengers). We are looking for A&P Mechanics with 2+ years of experience on corporate aircraft. Bombardier products are a big plus and will receive higher compensation.(Learjet, Challenger, Global).