Full time Sheetmetal Technician. Perform sheetmetal repairs and modifications using approved data with limited supervision. Provide routine and non routine inspections and complete repairs as necessary. Perform other duties that may be assigned by supervision. Company operates both B737 and SD360 aircraft. Airframe only or both A&P highly desireable.
Duties include the following (other duties may be assigned as required by management):• Completing tasks assigned in accordance with the procedures set forth in various company and maintenance manuals (General Maintenance Manual, SIEM, AMM, IPC , etc.).
Is responsible for accomplishing assigned maintenance, preventative maintenance and repair work on company aircraft.Makes certain that all safety and accident prevention measures are adhered to and corrective action taken as warrantedInspects parts, sub-assemblies and completed assemblies only to the extent necessary to determine, accomplish and approve own work.Responsible for the repairing, s
***AVIONICS TECHNICIAN NEEDED -- A&P Preferred*** Full-Time, Permanent position available for an Avionics Technician at a regional cargo airline located at HNL. One year of experience with aircraft required. Must be able to work any shift, including weekends and holidays. Must have basic hand tools.
A&P Mechanic for a Hawaii-Based US FAA part 121 Air Carrier. The Aircraft Maintenance Technician is responsible for maintenance and repairs to keep aircraft working safely and efficiently. Duties include;Inspect, test, maintain, and service company aircraft.
Role:Quality Assurance TechnicianLocation: Phoenix, AZDuration:5 months+Required skills:- High School diploma or GED equivalent, including basic math and ability to understand written and verbal work instructions in English- Ability to work with a flexible fabric product which may require numerous flexible adjustments and finesse by hand- Ability to measure straight lines using a ruler or measu
Title: Composite Technician2nd Shift: 3:45pm-2:15amContract: 25 monthsRESPONSIBILITIES: • Trimming and finishing of composite and composite metallic assemblies • Assembly of structures including setup, bonding and fastener applications, surface prep, using grit blast, and hand abrade and power abrasion techniques • Laminate assemblies by determining proper placement of composite materials into
Title: Composite TechnicianLocation: Manassas, VADuration:6+months Specific Responsibilities:
Description:Extensive avionics experience with performing: FMEA/FMECA,organizational level testability analysis, and Built-in Test (BIT) design andverification.A thorough understanding of the relationship ofthe testability analysis and FMEA.Extensive use of Microsoft Excel, includingmacro development.Avionics maintenance experienceAbility to develop diagnostics at the systemlevel-candidates mus
Role: InspectorLocation: Santa Maria CA Duration:1 year+We have a need for 2 Faro Arm Inspectors (1 day, 1 night). They will be working on the new line that will be coming .
Job Description:Performs precision assembly on complexproduction and repair actuators.Adjusts or aligns through shimming and othermeans of mechanical adjustments specified by blueprint or other specificationlimits. Utilizes a variety of mechanical measuringequipment such as: Dial Indicators, Calipers, and Micrometers to obtain properassembly-build requirements.
Performs inspections of:
Our Client in Phoenix, Arizona will need 1 Planning Analyst that can travel to all Interiors Sites that are currently using SAP. A Planning background and expertise in Master Production Scheduling (MPS), Forecasting, Material Master, and Sales and Operations Planning are required to drive and educate each site to a successful APO implementation.
Role:Performance EngineerLocation:Independence OH 44131Duration:1 year+ Basic Qualifications Bachelor's degree in Mechanical or Aerospace Engineering • A minimum of 8 years of experience in analysis tools and techniques o 5 years of experience within the Aerospace industry; must include extensive experience in development of transport and / or military type aircraft • Demonstrated experience
Description:The Product Engineer is usually assigned direct engineering responsibility for a variety of production programs. For mature production programs the Product Engineer has full design responsibility for the product. The Product Engineer is responsible for implementing the transfer of development programs to the production environment.
- Consistently and accurately disassemble, clean, evaluate, perform repairs, modifications and assemble components in accordance with approved data.
- Work independently with limited supervision.
- Use precision measuring instruments and gages such as feeler gages, dial indicators, micrometers, calipers, etc.
Perform Individual Static Load Conditions in order to calibrate Strain Gaged Aircraft Components and Load Cells. Qualified candidates must have previous experience in all three levels of our process: Set up, Record, and Test.
Responsible for installing structures on the assembly of the helicopter, working in areas that may be cramped and or little room. The technician will work from engineering drawings and job cards andfollow the production schedule.The technician must be able to work through obstacles and know the best method to perform the job.
Job Title: junior Embedded System Test EngineerDegree: Electrical, Computer Science, Mech. Or Aerospace degree with their internship or projects in Embedded System will be mandatory.
Role:Senior Financial AnalystLocation:Windsor Locks CTDuration:6 months+Job responsibilities.: Assist with timely and accurate monthly financial close and quarterly accounting requirements. Perform key account reconciliations Assist with departmental Sarbanes-Oxley testing, annual ACA reviews, and various other compliance reviews as required.
Role: Quality InspectorLocation: Trumbull, CTDuration:1 year+Experience/Qualifications: - Must have an FAA Mechanic certificate or 18 months product specific experience - Minimum three years of experience in a technical role in a Repair Station environment or equivalent. - Strong familiarity with 14 CFR parts 21, 43, 65, & 145.
Role:CONFIGURATION CONTROL ASSISTANTLocation: Philadelphia PADuration:6 months+EXPERIENCE:Three years of experience in the same or equivalent role QUALIFICATION:Experience in configuration control activitiesFamiliar with ENOVIA/CATIA/SAP SW and DATABASEUsage of Microsoft Office suite (including Access).
Role: NC Programmer(1 shift)Location: McAlester, OkDuration:6-12 MonthsSKILLS NEEDED:SmartCam is neededStrong 3/4 axis experienceCatia V5 is helpful but not neededSAP is helpful but not needed
Role: Airframe and Power plant (A&P) MechanicLocation: Wichita KSDuration:1 year+Mechanic will need to be able to work in Wichita, Kansas with occasional travel and work on the weekends. - A&P mechanic license is REQUIRED. - Must be flexible to work ALL shifts. - Must have heavy flight line and power plant experience
Role: Aero engineerLocation: Mojave CADuration:6 months+Performance and HQ design to support flight test loads and trades