Job Listings

RMS Global Sustainment (Lockheed Martin) is currently seeking a qualified applicant for the S-92 Helicopter program. The applicant must have 5 years recent experience performing aircraft maintenance on helicopters. S-92/S-76/UH-60 experience is preferred. A&P LICENSE IS REQUIRED.

Must be able to accomplish any and all repairs, modifications with minimal or no supervision on Boeing 737, MD-80, CRJ/ERJ aircraft. Remove, disassemble, clean, inspect, repair, and re-install as needed of aircraft cabin interior furnishings such as ceiling panels, fabric recovery, upholstery, carpet laying, cabinetry, etc. Document maintenance performed on required forms.

RMS Global Sustainment (Lockheed Martin) is currently seeking qualified applicants for the S-92 Helicopter Support program. Qualified applicants must have 5 years recent experience performing aircraft maintenance on helicopters, S-92/S-76/UH-60 experience preferred. A&P license is required.

The Technician A, S/M is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, with minimal supervision.

The Technician A, A/P is responsible for performing intermediate/heavy maintenance tasks without supervision. ESSENTIAL DUTIES AND RESPONSIBILITIESPerform flight control and engine throttle rigging. - Able to use FAA approved data (i.e. IPC, M/M, OHM, SRM) proficiently. - Insure work performed adheres to high quality standards. - Effectively direct the work of less experienced mechanics.

Coordination of sheet metal activities related to the completion and repair of new and used aircraft.

IMMEDIATE HIRE Avionics Technician - Philadelphia, PAAviationRequired Profile:Minimum 5-10 years#8217; experience.Experience must include helicopters.A&P License and/or FCC License preferred but not required.Must be familiar with wiring schematics, wire bundles, and harness identificat

Performs inspection of aircraft, components, assemblies, tools or parts during modifications, installation, service, or overhaul to determine airworthiness, safety or conformance to approved data and Company standards and requirements.

Aerotek Aviation is looking for an experienced Sheet Metal Mechanic.

Aerotek Aviation is looking for a Landing Gear Technician

Aerotek is looking to hire several Avionics Technicians in Wichita, KS. These openings are with a large aircraft company in their flight test division.Candidates will be doing Avionics repair, install and modification work on business aircraft.

Aerotek is looking to hire several Aircraft Mechanics for a large aircraft company in Wichita, KS.

Must have 3+ Years Repair and Overhaul FAA 145/ Repair Station ExperienceThe Overhaul/Test Technician-A position is responsible for overhauling or repairing and testing electromechanical, hydraulic and pneumatic accessories (products) at various stages of the repair and overhaul process to determine whether the accessory (products) meets specifications relating to quality, workmanship, dimensio

Job Overview:

  • Looking for Heavy Sheetmetal/Structures mechanics to perform heavy maintenance in a Military MRO environment on Boeing 707 aircraft


Aerotek is currently seeking several Electronic Bench Techs.Job Description:

Aerotek is seeking Avionics Technicians for a company that operates a MRO facility to perform military ISR modifications to a variety of turboprop aircraft including C-12s and Dash-8s.Job Description:

Aerotek is currently seeking several Avionics to support large MRO facility based out of Bridgeport, WV.Job Description:

Aerotek is currently seeking several Sheetmetal Mechanics to support large MRO facility based out of Bridgeport, WV. Due to growing business demands, additional lines of maintenance being added, and inspection work, our client is looking to add personnel to their staff to deal with the spikes they will experience in the next 2-3 weeks.

Aerotek's client is an electronic defense company located at the Hagerstown Regional Airport in Hagerstown, MD. The company operates a MRO facility where they perform military ISR (Intelligence, Reconnaissance, & Surveillance) modifications to a variety of turboprop aircraft (C-12, Dash-8).

Aerotek is currently seeking several A&P Mechanics to support large MRO facility based out of Bridgeport, WV.

Accepting Entry Level A&P Mechanics!!

  • Line and hangar maintenance on EMB 120's and SA 227 Metro.


  • A&P License
  • Must have basic tools


  • Turbo Prop experience

Bonus Experience:

$500 Relo Bonus!Currently seeking Aircraft Mechanics to support the L2G, the Army is performing the conversions on the UH-60s on the L2G program and the US Air Force is procuring the UH-60s from the US Army after the conversions are complete.

  • The Licensed A & P Mechanic performs scheduled maintenance, makes repairs, and completes inspections required by the Federal Aviation Administration (FAA).
  • Perform general modification work as necessary.
  • Inspecting engines, landing gear, instruments, pressurized sections, brakes, valves, pumps, and air-conditioning systems

Looking for Sheet Metal Mechanics- High paying position $30-40/hr- No tools needed!Required Experience:Five years commercial/naval sheet metal experience/Aviation sheet metal experience acceptable!Required Skills:

Under close supervision, this position is responsible for fabricating, modifying, installing, troubleshooting, repairing, and maintaining ground, airborne, and electronic equipment such as unmanned aerial vehicles, ground control stations, and ground support equipment in accordance with established technical specifications, engineering instructions, and technical orders / procedures.


About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more.

The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

More Info

Joe Escobar (
Editorial Director

Greg Napert (
Publisher, Sales & Marketing

Bob Graf (
Director of Business, Sales & Marketing