Job Listings

Fabrication Specialist C / Machinist LAUNCH Technical Workforce Solutions is seeking Machinists for an opportunity in Helena, Montana. Job Duties and Responsibilities: Performs machine set-up, machining, and fabrication tasks. Works on articles of complexity following established drawings and requirements.

The AWACS Aircraft General APG QC Inspector is responsible for performing inspections for pre-flight, through-flight and basic post flight.JOB DUTIES & RESPONSIBILITIES

The successful candidate will be responsible for troubleshooting, installation and servicing of avionics communications equipment and electrical system wiring while ensuring the equipment meets mandated requirements and specifications. Perform testing and calibration of avionic systems including computer and electronic communication panels.

North Bay Aviation which is a certified F.A.A. Repair Station located in Fairfield, California is seeking experienced avionic bench technicians to test, repair, and overhaul commercial and military aircraft components.

Principal Duties and Responsibilities: File PM paperwork and purge files. Organize GSE manuals. Basic data entry as needed in the GSE data base. Support the GSE Data Specialist. Other duties as assigned.

Minimum Qualifications:

* Available to work Monday through Friday day shift hours

* Possess effective communication skills both verbal and written

Unique Skills:Ability to work independently or as part of a team to install, test and troubleshoot aircraft avionics and electrical systemsEducation and Experience Requirements:High School graduate/GED. A&P license, FCC license or NCATT certification preferred.

Structural Mech IIISavannah, GALT ContractPay Rate: DOEMust be a US Cit or Green Card holderUnique Skills:N|AEducation and Experience Requirements:High School Diploma/GED. Q-Stamp preferred. Three (3) years related structural assembly experience.

Structural Mech Sr.Savannah, GALT ContractPay Rate: DOEMust be a US Cit or Green Card holderUnique Skills:A|C wing experience preferred.GAC structural experience preferred. Some computer skillsEducation and Experience Requirements:High School Diploma/GED. Q-Stamp preferred. Four (4) years related structural assembly experience.

A&P Mechanic Airframe and Power Plant MechanicVery Urgent Job Opportunity! Serious and experienced A&P Mechanics!Bombardier, Learjet, Challenger, Global, Falcon Jet, Gulfstream, Citation, Embraer, Hawker Beechcraft or Boeing, BBJ, Airbus Experience is an Immediate Hire!Only Serious Candidates Need to Apply! Please send an updated copy of your resume in a Word Document Immediately!

UH-60 Blackhawk Avionics Technician

Looking for Technicians to troubleshoot and repair monorails at EWR Airport.Technicians will perform overhaul tasks and activities as defined by the Project Manager. Perform installations and necessary inspections as well as testing to ensure that the assigned work scope is properly integrated and meets defined requirements.

I'm currently working with a reputable company in the Long Island area and they are looking to hire a General Aviation A&P mechanic to perform maintenance on their Turbo Prop Aircraft with 2 plus years of experience. They will be performing scheduled maintenance that varies from light bulb changes, tire changes to engine changes.

MUST HAVES:-Challenger experience preferred, but will also hire entry-level candidates-Own tools, shadowed and etched-A&P licenseCandidates will be responsible for performing scheduled and unscheduled maintenance on corporate aircraft to include all models of challenger, lear and global express. This is a service center environment with 2 primary shifts and a weekend shift.

A&P Mechanic working on EMB 135,145, 170,175, 190 and CRJ 200,700, 900's. Line maintenance during the day or overnight maintenance items. If a mechanic has exp at any Part 121 operator on airframe they are acceptable. Work Environment:

  • Hangar or line mx as needed
  • Must be able to work any shift
  • Must provide own tools

Qualifications:

Currently seeking Avionics Technicians to support their the LSFMA Afghan PMI contract doing phase maintenance and resets on UH-60s. They are looking for technicians who have modification and install experience, and/or troubleshooting experience. Must be able to route, run, and terminate wires.Work Environment:

Currently seeking Aircraft Mechanics to support the LSFMA contract Afghanistan UH-60 PMI program to perform phase maintenance on UH-60 aircraft.Work Environment:

  • Air Conditioned facility
  • 40 hours/week (OT as needed)
  • 1st Shift: 7:30am-4pm
  • No tools required

Qualifications:

Currently looking to hire Avionics Technician due to a few recent contract that were awarded that will involve individuals to perform heavy mod work on King Airs, Dash-8's and Beech1900s. Looking to employ individuals for the next 6-9 months. Avionics Technician is responsible for installation, troubleshooting and repair, and maintenance of electronic systems on Dash-8 and KingAir Aircraft.

Performs a variety of tasks ranging from repetitive to non-repetitive production assembly operations on electronic and/or mechanical assemblies and sub-assemblies such as modules, boards, panels, drawers, frames, and cables. Works from diagrams and drawings, makes initial layouts, and uses hand and/or power tools, jigs, and saws. Makes continuity checks on work in process and completed.

Aerotek is currently seeking A&P Mechanics for a direct hire position in Olathe, KS. Seeking candidates with business jet experience (turbine and/or turboprop).Job responsibilities will include:

SummaryResponsible for supervising building engineers and technician staff and manage facility resources. Must be able to work alongside the team to support the facility systems (i.e. mechanical, electrical, plumbing, HVAC systems). The position calls for someone with technical competence as well as managerial skills.Responsibilities and Duties:

Aerotek est présentement à la recherche de mécaniciens prévol pour son client Bombardier.Les postes sont disponibles dans les différentes régions de Montréal, telles que Dorval, Ville-Saint-Laurent et Mirabel.En tant que mécanicien prévol, vous serez appelé à:Installer et réparer les composantes mécaniques;Effectuer des essais fonctionnels et les ajustements sur les systèmes d'avions; Inspecter

Looking for strong avionics troubleshooters for our client in Tampa. Need at least 2 years of experience on any platform of aircraft. If interested please apply or give me a call :) About Aerotek:We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity.

Job Description:Performs assembly, dis assembly and repairs required in the completion of air frame overhaul, repair or modifications, including but not limited to removal, replacement and repair of parts of engines, air frames and systems.

Looking for entry level A&P mechanics or candidates who are in school trying to obtain their A&P. A great opportunity to start your aviation career or expand your aviation career. If interested please apply or give me a call ! About Aerotek:We know that a company's success starts with its employees. We also know that an individual's success starts with the right career opportunity.

Our client is currently seeking Aircraft Mechanics/A&P Mechanics to support their the LSFMA L2G contract and the Dept of State FMS program 1. L2G which is an Air Force conversion from the UH-60 L model to the G Model and 2.

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901