Wing Skin Prep Mechanic B

Company: 
Boeing Company
Category: 
Maintenance
Job Type: 
Permanent
City: 
Auburn
State: 
Washington
Country: 
USA

Auburn,Washington,United States
22304
Mechanics in this position prepare finished wing skins, spars, webs, chords, splice-plates, and stiffeners for storage/transportation and fabricate sub assemblies from wing components that are later incorporated into larger wing assemblies. Employment in this position also requires walking, bending and twisting at the waist, carrying less than 10 pounds, flexion/extension, handling, lifting 10-35 pounds, pushing/pulling 10-35 pounds, rotation of head/neck, standing, use of low impact vibratory tools, contact with metals, solvents, exposure to noise, atmospheric conditions, and the use of personal safety gear for face/eye, hand/arm, ears and feet. Work assigned by lead or supervisor based on priority requirements. Operate over head crane to move parts (e.g., wing skins, stringers), using slings, clamps, and other lifting and securing devises to properly perform required lift and move to work area. Obtain appropriate engineering drawing(s) for assigned job, using on-line computer systems (e.g., Bold/Web). Check part (e.g. stringer), for unpainted areas, ensure touch up with primer, cure in oven, as required per Boeing (BAC) specifications. Ensure part (e.g., stringer) matches work order W/O, production order number and drawings. Apply ink part mark (e.g., part number, date, and shop) to meet Boeing (BAC) specifications. Locate steel stamped identification on inboard most tab to ensure work order (W/O) matches steel stamp before tab removal. Ink part mark production order number on stringer per W/O, drawing and Boeing (BAC) Specifications. Remove wing skin lifting tabs with tools (e.g., hand power sander). Prepare detabed area for shot peen, per Boeing (BAC) specification. Shot peen detab surfaces, per W/O and to meet Boeing (BAC) specifications, as required. Install bushings and fittings into housing using pneumatic puller. Apply liquid nitrogen to facilitate installation of bushing and freeze plugs, as required, per (BAC) specifications. Roller swage bushings and fitting into housing per (BAC) Specifications. Locate, drill, ream, full size holes in part (e.g., channel vent, splice plate, and clips), in proper sequence and to correct size , per drawing, W/O, or tooling instructions using drill motor (e.g., Winslow, 90-Power Vane).Disassemble parts and deburr holes using chip chaser, deburring tools and files to prepare for installation of fasteners. Use solvents to clean surfaces prior to sealing or assembly. Apply seal and/or topcoat including fillet seal to parts, as required by (BAC) specifications. Use appropriate personal protective equipment. Install fasteners per drawing using correct tools (e.g., rivet gun and bucking bar, lock bolt puller, power screwdriver, C-squeeze, ratchet wrench, nut runner). Check work after completion of operation in job /or completed job to ensure assembly is complete, per drawing, that there are on defects (e.g., gapped heads, high rivets, toolmarks. incorrect length fasteners), and the area around job is clean, prior to putting up for inspection. Sell completed job or in process checks to inspector at appropriate steps in sequence. Perform minor rework, as required (e.g., pick-ups). Handle and dispose of hazardous materials in approved manner (e.g., paint, sealants, and solvents). Use precision measuring instruments necessary to accomplish work assignments. Maintain personal and tool certifications, as required. Boeing is the world's largest aerospace company and leading manufacturer of commercial airplanes and defense, space and security systems. We are engineers and technicians. Skilled scientists and thinkers. Bold innovators and dreamers. Join us, and you can build something better for yourself, for our customers and for the world.Current Boeing employees working in Puget Sound and Portland must submit an Employee Request Transfer (ERT) to be considered in the eligible candidate pool. Resumes of current Puget Sound Boeing employees submitted via Careers at Boeing will not be considered. This is an hourly position governed by the IAM Collective Bargaining agreement. High school graduate or GED preferred.This position must meet Export Control compliance requirements, therefore a #8220;US Person#8221; as defined by 22 C.F.R. #167; 120.15 is required. #8220;US Person#8221; includes US Citizen, lawful permanent resident, refugee, or asylee.
Preferred qualifications

  • knowledge operating overhead cranes in a safe manner
  • experience working with the following power tools - drills, sanders, rivet gun
  • experience utilizing and following detailed work instructions, reading and interpreting blueprints, drawings, or specifications
  • experience in working with composites lay-up, fabrication and repair

No
Fabrication
Individual Contributor
Yes
No
Standard
United States; The Boeing Company
Puyallup;Washington;United States~

First posted: 
8/22/2018 1:41:29 PM

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901