Inspector 3 (Space)

GE Aerospace
Job Type: 
New York
United States

Job Description SummaryIn this position, you will be inspecting assembled parts for imperfections and nonconformities. You will review all parts that you are assigned against the blueprints and process sheets to verify that the parts meet customer standard. You will be testing all electrical components and measuring them with an ohm meter, ruler and micrometer. Any non-conforming parts you will need to either send back to the assembly team for repair or out for scrap if it is non-repairable.Job DescriptionBasic Qualifications

  • High School Education or GED.
  • 3 years’ inspection experience in a Manufacturing environment
  • This role is restricted to U.S. persons (i.e., U.S. citizens, permanent residents, and other protected individuals under the Immigration and Naturalization Act, 8 U.S.C. 1324b(a)(3)) due to access to export-controlled technology. GE will require proof of status prior to employment.

Eligibility Requirements:

  • Ability and willingness to use hand tools and measuring devices (i.e. – optical comparators, ohm meters, leak check, CMM’s, dial calipers, rulers, tape measures, protractors, micrometers, gauges, etc.) as required within department.
  • Proficient in use of basic computer applications, such as Oracle and Microsoft applications.
  • Possess specific knowledge in one or more of the following disciplines (Receiving Inspection, Electrical Inspection, Mechanical Inspection)
  • Possess intermediate understanding of blueprint and process sheet interpretation, including functional knowledge of geometric dimensions and tolerances (GDT);
  • Ability and willingness to pass visual acuity exam upon offer
  • Ability and willingness to obtain Braze, Weld and Solder inspection certification as required

Essential Functions Responsibilities:

  • Utilize manual or automated measurement and testing equipment to assure quality of products
  • Use statistical process control and statistical quality control techniques as required.
  • Identify and document non-conforming parts, while using Oracle to maintain inspection records
  • Inspect all raw materials and purchased parts to determine conformance to design requirement
  • Use statistical process control and statistical quality control techniques as required
  • Perform duties on more complex, proto-type or first-time builds. Perform final inspection responsibilities as required by area;
  • Perform and document First Article inspections as required.
  • Perform complex testing (i.e. – surge test, di-electric, hipot, helium leak check, ATP, hardness testing  etc.) as required.
  • Complete understanding of operation of all inspection equipment within the department.
  • Perform manual set up, test, and troubleshooting which includes performance testing and trim grind.
  • Perform job responsibilities according to internal process specifications and third-party requirements
  • Utilize proper PPE, safety equipment, and follow safety procedures; Assist support functions in root cause analysis
  • Proactively work to improve efficiency and quality of products. Cross-train other employees as needed based upon knowledge and experience.
  • Compliantly complete all written and/or electronic labor tracking documentation.
  • Report problems to appropriate resource and/or Coach.
  • Keep all shift operators informed on special problems involving operation or set up
  • Communicate with team to ensure all team members are aware of product deficiencies, new processes, or issues.
  • Participate in and assist in leading  team initiatives; Receive guidance from experienced employees
  • Work with limited supervision; Other duties as required by department

Desired Qualifications:

  • 3-5 years Inspection experience in a manufacturing environment
  • Experience in Customer requirements;  Audit experience
  • Basic knowledge of Quality System requirements (AS9100)
  • Prior knowledge of electrical test method to include ohm meter, gauss meter, surge test, hi pot, etc.
  • General knowledge of electrical components and test methods
  • Preferred assembly, solder, or electronics manufacturing experience. General knowledge of assembly techniques
  • Experience in a self-directed team environment;  Lean manufacturing knowledge

Additional Information: The pay for this position is $21/hr. This position is also eligible for an annual discretionary bonus based on a percentage of your base salary/ commission based on the plan. This posting is expected to close on 2/27/24.Healthcare benefits include medical, dental, vision, and prescription drug coverage; access to a Health Coach, a 24/7 nurse-based resource; and access to the Employee Assistance Program, providing 24/7 confidential assessment, counseling, and referral services. Retirement benefits include the GE Retirement Savings Plan, a tax-advantaged 401(k) savings opportunity with company matching contributions and company retirement contributions, as well as access to Fidelity resources and planning consultants. Other benefits include tuition assistance, adoption assistance, paid parental leave, disability insurance, life insurance, and paid time-off for vacation or illness.General Electric Company, Ropcor, Inc., their successors, and in some cases their affiliates, each sponsor certain employee benefit plans or programs (i.e., is a “Sponsor”). Each Sponsor reserves the right to terminate, amend, suspend, replace, or modify its benefit plans and programs at any time and for any reason, in its sole discretion. No individual has a vested right to any benefit under a Sponsor’s welfare benefit plan or program. This document does not create a contract of employment with any individual.If you are a qualified individual with a disability or a disabled veteran, you have the right to request a reasonable accommodation for purposes of participating in the application/hiring process with GE. If you are unable or limited in your ability to apply or interview as a result of your disability, you can request reasonable accommodations by emailing us at Any offer of employment is conditioned upon the successful completion of a background check and drug screen (as applicable). This role requires access to U.S. export-controlled information. If applicable, final offers will be contingent on ability to obtain authorization for access to U.S. export-controlled information from the U.S. Government.Additional InformationGE offers a great work environment, professional development, challenging careers, and competitive compensation. GE is an Equal Opportunity Employer. Employment decisions are made without regard to race, color, religion, national or ethnic origin, sex, sexual orientation, gender identity or expression, age, disability, protected veteran status or other characteristics protected by law.GE will only employ those who are legally authorized to work in the United States for this opening. Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable). Relocation Assistance Provided: No

First posted: 
9/8/2023 12:00:00 AM

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (
Editorial Director

Greg Napert (
Publisher, Sales & Marketing

Bob Graf (
Director of Business, Sales & Marketing