What we do:Air Transport International (ATI) is an experienced supplemental carrier with the ability to reach across the globe. ATI is an FAR Part 121 charter airline headquartered in Wilmington, Ohio, and operates a worldwide fleet of Boeing 757 and 767 cargo and combi passenger aircraft. ATI specializes in freight forwarding, government and military contracts.
Job Listings
Stratus Management operates under 14 CFR Part 91 in support of our company located in beautiful Spartanburg SC just 30 minutes north of Greenville SC and 60 minutes south of Charlotte NC. Our Guiding Principles include Integrity, Partnership, and Initiative. We have an opportunity for an experienced Technician.
Pay: $28 - $36/hr - Contract to Hire PositionDescription:-Perform maintenance, preventive maintenance, and alterations to Panasonic Avionics Corporation (PAC) In-flight Entertainment Systems-Troubleshooting and testing of electronic assemblies and units-Removal and replacement of electronic assemblies, units or cabling while installed in the aircraft -Modification/alteration of installed equipm
OVERVIEW:The company is a full-service helicopter facility headquartered in Northern California. They provide worldwide around the clock service and support. This location is at their main maintenance facility.DUTIES:- Seeking experienced A &P Mechanics for their Certified Repair shop: MRO (maintenance, repair, overhaul).
**Looking for licensed and non-licensed A &P mechanics to work on Corporate aircraft in Wichita, KS!!Pay: $30-45/hr depending on experience About Aerotek:We know that a companys success starts with its employees. We also know that an individuals success starts with the right career opportunity.
Description:Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft. Access and re-install aircraft components, which obstruct the performance of assigned tasks.
Description:Perform inspection, make adjustment and repair, replace components, and correct any malfunction or deficiency with and without power applied to the aircraft. Access and re-install aircraft components, which obstruct the performance of assigned tasks.
Description:This is a Bench Level Electronics Technician.Responsible to perform testing, troubleshooting, repair, and modification of various moderate to complex electronics/avionics equipment in accordance with companies Services Workmanship and Quality Standards for products returned from airlines, dealers, airframes, and/or end users for service under close or general supervision depending o
Assembly PositionDescription:Summary: Responsible for and has experience with basic sheet metal, riveting, assembly methods, and common shop practices.
Assembly PositionDescription:Summary: Responsible for and has experience with basic sheet metal, riveting, assembly methods, and common shop practices.
Description:Preferred Qualifications:Troubleshooting skillsGarmin Avionics knowledgeAvidyne Avionics knowledge91.411 and 91.413 Pitot Static capabilities / Repairman CertificateCapable of performing InstallationsExperience with systems such as NAV/COM, Autopilot, GPS and RVSMSkills:Avionic, Troubleshooting, Aircraft, Install, Avionics installation, Installation, Electrical, Wire harness, Avioni
Aerotek Aviation is currently reviewing resumes for an A &P Mechanic to work for a an aviation maintenance client of ours in Waterford, Michigan.Pay Range:$30-35/hr.Job Description:Working on GA and corporate aircraft.•Perform Maintenance on all aircraft types, building and equipment maintenance •Assist and Cross train as needed in wiring, structural repair, interior and Line services •Goo
Aircraft Mechanics (A &P) wanted for a repair station at the Washington County Airport in Washington, PA. Aircraft Mechanics will be working at a 135 Operator that focuses on Learjet models. Mechanics will be handling maintenance, Inspections & AOG situations.
Description:We are looking for an A &P Mechanic at the Washington County Airport to work in their repair station.
Helinet is a diversified helicopter service provider located in Van Nuys, California. We are a dynamic, fast-paced company that provides services to a wide range of markets, including VIP charter, air medical, electronic news gathering, motion picture production, utility, and public safety.
Looking for Skilled Sheetmetal Mechanic who can do inlets, components, back shop work.
Must have finesse and attention to detail in there work
Must be able to pass a sheetmetal test
Back Shop Sheetmetal techs needed in Solon, OH
Component, Inlets, Off Wing Sheet Metal work
Long Term assignment - with potential for direct placement
Must pass a sheet metal test prior to starting
Immediate Feedback
Email resume to mandy@hsgi-inc.com
Are you an A++ TOP NOTCH Structures Mechanic who wants to work with an AWESOME Team?
Looking for guys who want a long term - temp to perm opportunity working back shop/off wing structures on corporate jets.
Must be able to pass a sheet metal test
Tools are required
PJ Helicopters is seeking experienced candidates for full-time and rotational mechanic positions working in support of Fire Suppression / Powerline Construction for 2023. Our A P base/field mechanics perform a variety of general helicopter maintenance including, but not limited to, detailed aircraft inspections, minor and major repairs and alterations, preventative maintenance, and servicing.
Structural Mechanics are needed for an immediate long-term contract in San Antonio TX. Looking for at least 4 years of structural experience doing heavy modifications. Fighter jet experience preferred. Lots of hours. long-term chance to go direct.
Structural Assemblers needed in San Antonio working on large aircraft. Must have at least 5 years of structural maintenance/mod/assembly experience, Must be able to read blueprints, Very quick start. Great hours, long term, the chance to go direct. There will be 50% travel between San Antonio, Victorville, and Charleston.
Avionics Techs needed in San Antonio doing modifications to fighter jets. Must have at least 4 years of avionics modification/troubleshooting experience. Must be able to read schematics. Great pay, long-term, overtime, chance to go direct.
1ST SHIFT: 0600-1530
Under general supervision and Manufacturing direction, determine from Engineering information the most efficient and expedient method of machining parts, assemblies, and related tools where dimensional sequencing of operations is required on numerically controlled machine shop equipment.