Job Listings

A &P Mechanic (Hawker) Augusta, GAMust have Hawker experienceThis position is responsible for the technical guidance, coordination and delegation of assignments to technicians assigned to the aircraft. Serves in lieu of the Crew Chief during his absences. 8226; Helps crew members improve their skills, builds trust and promotes teamwork with the maintenance crew(s).

A &P Mechanic - Greeneville, TNExperience:3 GIV-SP out in Greeneville, TN location (KGCY) as well as the Cessna Citation family of aircraft we service in NC (CJ3, Encore, XL/XLS, Sovereign, and X).

Avionics Lead Technician - Rockford, ILSUMMARYThe Avionics Lead Technician is responsible to his or her respective department supervisor for all functions assigned to provide airworthiness of the aircraft upon completion of maintenance at the facility.

Composite Lead Tech - Rockford, ILSUMMARY:The Composite Lead Technician is responsible to his or her respective department supervisor for all functions assigned to provide airworthiness of the aircraft upon completion of maintenance at the facility.

-->Position: Composite Technician - Rockford, ILOnly qualified candidates with the below experience will be considered for this position.Job Description: Performs composite repairs related to molds, wet and pre-preg layup, repair of existing structures pertaining to Honeycomb, Carbon Kevlar and Fiberglass constructions.Must have minimum 1-3 years recent experience in an aviation settingAviat

NDT II Inspector - Rockford, ILSUMMARY:Inspection of aircraft services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness by performing the following duties. ESSENTIAL DUTIES AND RESPONSIBILITIES: Set up, standardize, perform, and document non-destructive testing on aircraft and components. Interpret and evaluate results for acceptance or rejection.

Inspector Lead - Rockford, ILSUMMARY:Services, repairs, and overhauls aircraft and aircraft engines to ensure airworthiness by performing the following duties:ESSENTIAL DUTIES AND RESPONSIBILITIES:Process daily incoming and outgoing material to meet Quality Control requirements as stated in the AAR ISO 9000 Procedures Manual and Customer Requirements Manual.

NDT Technician Sr (Level II Certified) in GAC St. LouisUnique Skills:NDT Level II capability. This position will provide MAUS support.Education and Experience Requirements: High School Diploma or GED required. 6 years technically related experience required. 1 year NDT experience on aircraft supporting airworthiness decisions required.

RS Sheetmetal Technician Sr in GAC St. LouisUnique Skills:Structural sheetmetal for the horizontal stabilizer team and other misc repairs.Education and Experience Requirements: High School Diploma or GED required. Four (4) years of sheetmetal and/or fabrication experience. Experience in aerospace industry preferred. Valid Driver's License required.

Sr Equipment Maintenance Technician - 2nd Shift - Tulsa, OK in Tulsa, OKUnique Skills:As an Equipment Maintenance Technician at Gulfstream you will be responsible for supporting our campus facilities' electrical and mechanical equipment needs.

Position/Title: Manager of Aircraft Maintenance Training Reports to: Director of Training ServicesLocation: Wayne, Pennsylvania (#8220;Philly#8221;)A.Overview At Eastern Airlines curiosity and excitement for growth go a long way. In fact, Eastern Airlines was launched by seekers, adventurers and above all fliers.

Urgent needs -PDS Tech, Inc. is seeking Aircraft Mechanics in San Antonio, TX.- LOTS OF O.T.

Composite Technician LAUNCH Technical Workforce Solutions is seeking Composite Technicians with experience performing body and structural repairs on commercial aircraft for an opportunity in Wilmington, OH.

Optical Technician LAUNCH Technical Workforce Solutions is seeking an Opttical Technician for an opportunity in Bothell, WA. Job Duties and Responsibilities: Performs a variety of duties in the electronic, mechanical, electromechanical, and/or optical areas. Constructs, troubleshoots, calibrates, adjusts, tests, diagnoses, and maintains equipment, components, devices, or systems.

Electronics Technician LAUNCH Technical Workforce Solutions is seeking Electronics Technician for an opportunity in Lexington, KY Job Duties and Responsibilities: The Electronics Technician Maintenance I applies basic technical knowledge to perform simple or routine tasks following detailed instructions, performs such tasks as replacing components, wiring circuits, repairing simple electronic e

Inspector LAUNCH Technical Workforce Solutions is seeking Aircraft Parts Inspectors for an opportunity in Oldsmar, FL Job Duties and Responsibilities: Uses work instructions, drawings or inspection instructions and checklists to visually inspect circuit card assemblies to manufacturing and industry specifications including IPC and related reference documents and standards.May monitor and verify

Manatee County Mosquito Control District, Palmetto FL
Description of Occupational Work #8211; Helicopter Technician:

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
COMPOSITES STRUCTURES TECHNICIAN
RESPONSIBILITIES:

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
TIG WELDER (DRAGON SPACECRAFT)

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
STRUCTURES TECHNICIAN (STARSHIP) - MULTIPLE SHIFTS

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
QUALITY INSPECTOR (TUBE SHOP)
RESPONSIBILITIES:

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
LAUNCH QUALITY INSPECTOR

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
PROPULSION TECHNICIAN (RAPTOR TURBOPUMP)

SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
QUALITY INSPECTOR (BUILD RELIABILITY)

Great ideas sometimes come from singular inspiration, but more often they’re a result of collaborative effort. Inside Garmin, we like to foster an environment of participation and engagement. We support professional development, offer well-designed career paths and adhere to a policy that prioritizes promoting from within the company to maximize the opportunities for our associates.

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901