KaiserAiris advertising an immediate opening for a full time Flight Mechanic.The Flight Mechanic will act as the primary maintenance representative forassigned aircraft while in the air and on the ground.
Job Listings
Perform Individual Static Load Conditions in order to calibrate Strain Gaged Aircraft Components and Load Cells. Qualified candidates must have previous experience in all three levels of our process: Set up, Record, and Test.
Quality InspectorLocation: Danbury, CT6-12 month contractPosition SummaryPerforms complex in process and final inspection activities. Assess product acceptance to ensure conformance to the design as defined by the engineering drawings and/or models.
Quality Inspector / TechnicianLocation: Clearwater, FLJob ID: #60270Duration: 6 - 12 mosPay Rate: $20 ph (W2) Job Description:Uses predetermined methods, operations, setups and prescribed specifications to inspect visually in-process and completed products such as electronic units and subsystems, precision electromechanical assemblies or mechanical units, subassemblies, structural flaws, inte
Electronic Assembler / TechnicianLocation: Anaheim, CA (92805)Duration: 12 mosPay Rate: $17.50 ph (W2) Job Description: 1. Assemble Electro-Mechanical parts and perform inner chassis wiring connections using both calibrated and non-calibrated hand tools per work order instructions2. Must have basic understanding of standard hardware installation sequence.3.
Mechanical/Electrical Repair TechnicianLocation: Monroe NC 28110Job ID #60456 Pay Rate: $20 - 22 ph (W2)6 month contract to Direct Hire Job Description: - Assist in the major minor assembly, disassembly, cleaning, inspection disposition of various types of components accessories under direct to moderate supervision as required.- Check validate LRU fit, form function parameters i
Aircraft (Flightline) MechanicLocation: Waco, TX (76705)Job ID: #60870Duration: 12 mosPay Rate: $30 - 35 ph (W2)Work Schedule: Should be prepared to work any shift as needed Job Description:The successful candidate will possess at least 8 years of experience (or equivalent, see qualifications) on aircraft flightline operations.
QA (In-Process/Final) InspectorLocation: Hauppauge, NY (11788)Job ID: #60871Duration: 12 mosPay Rate: $20 - 25 ph (W2) Job Description:Responsible for performing inspections, tests and/or audits of purchased parts, units, materials, equipment, panel/module level assemblies and quality control programs to specifications.
Assembly / Technician (2nd shift)Location: Wilson, NCJob ID: #60586Duration: 12 mosPay Rate: DOE - $ ph (W2) Job Description:Electronic Technician Repair (Avionics) Function: This position is responsible for testing, troubleshooting, and repair of units.
Title: Aircraft Technician IILocation: Atlanta, GA (30349)Job ID: #621711st shift 700AM #8211; 330PM + OTCompany SummaryAn Aircraft Maintenance Company established in 1945 with a concentration in repair, overhaul and support. For over 75yrs the Company's services include: component repair and overhaul, ground support test equipment, and airline service programs.
Avionic Instrumentation TechnicianLocation: Miami, FL (33142)Job ID: #61953OpportunityAircraft maintenance company since 1945 with a concentration in repair overhaul and support.
Butler is known for consistently exceeding customer expectations. Our top 20 customers have averaged more than 20 years of service by Butler, which is a testament to our quality and high standards.
Butler is known for consistently exceeding customer expectations. Our top 20 customers have averaged more than 20 years of service by Butler, which is a testament to our quality and high standards.
Description:Assist in the planning foraccomplishing periodic Preventative Maintenance and Inspections• Provide CH-148 Production SupportWork under the direction of Coatesville sitemanagementAble to troubleshoot CH-148 electrical systemsas neededEstablish trends for overhaul and major repairsneeded for planning and scheduling• Identify unscheduled maintenance plans andavoidances• Address stockin
- Assist in the planning for accomplishing periodic Preventative Maintenance and Inspections
- Minimum A P mechanic required with S-92 / Blackhawk experience
- Must have rotary aircraft structures experience preferably on Sikorsky products
- Establish trends for overhaul and major repairs needed for planning and scheduling
Aircraft MechanicLocation: Indianapolis, IN (46231)Job ID: #61825 Duration: 3 mosPay Rate: DOE - $ ph (W2) Responsibilities and Duties:• Perform all work assigned in accordance with approved FAA data.• Ensure complete and proper documentation of work performed.• Ensure that all maintenance performed and is in an air-worthy condition.• Maintains the premises and the repair station in a clean
COMPOSITE TECHNICIAN B Job ID: 633262Duration: 12mo - ContractPay rate: $23 - $27 p/hr DOEExperience: 6mos experience SummaryButler America Aerospace is a Composite Technician B for a contract opportunity with our Aerospace client in the Tucson, AZ area.As a Composite Technician B you will work in a dynamic, fast paced environment with a focus on quality and attention to detail.
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
EQUIPMENT MAINTENANCE TECHNICIAN (STARSHIP)
RESPONSIBILITIES:
SpaceX was founded under the belief that a future where humanity is out exploring the stars is fundamentally more exciting than one where we are not. Today SpaceX is actively developing the technologies to make this possible, with the ultimate goal of enabling human life on Mars.
TIG WELDER/TANK FABRICATOR (STARSHIP)
Located in Northern California, the team at Joby Aviation is driven by our goal of creating an affordable, all-electric air transportation system.
Located in Northern California, the team at Joby Aviation is driven by our goal of creating an affordable, all-electric air transportation system.
Type of aircraft: CorporateLongevity: 1+ year (Long Term)Type of work environment: ProductionSummaryIn a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data.Unique Skills: Comfortable working in confine
Type of aircraft: CorporateLongevity: 1+ year (Long Term)Type of work environment: ProductionSummaryUnder minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems. Essential Functions:
Type of aircraft: CorporateLongevity: 1+ year (Long Term)Type of work environment: ProductionSummaryLeads, supports, and assists the efforts of technicians performing avionics installations. Fabricates wire harnesses, installs, terminates, ring-out, and assists in functional test of avionics/electrical systems. Essential Functions:
Type of aircraft: CorporateLongevity: 1+ year (Long Term)Type of work environment: Production SummaryUnder moderate supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems Essential Functions: