Job Listings

Aerotek Aviation is looking for two sheet metal technicians to start as soon as possible. In the Addison TX area .Job description:

Aerotek Aviation is looking for four Engine field service technicians to start immediatelyJob description :Experienced A &P licensed field service technician to perform engine repairs and module level work scopes both in shop and in the field,domestically and internationally.

MINIMUM REQUIREMENTS

  • 4 years of experience of avionics installation experience (ADS-B highly preferred)
  • Must have own avionics tools
  • A &P License is a plus (not required)

JOB DUTIES

An Aircraft maintenance company at the Dayton, OH airport is looking for Avionics Technician. Work will entail Avionics installations and troubleshooting on corporate, general aviation, and military aircraft Candidates must have at least 2 years of Avionics installation and troubleshooting experience. Citation experience is a plus. A &P license is a plus This is a long term position.

PAY:

  • $35.50/hr (23 taxed/13.50 untaxed)

RESPONSIBILITIES:

Position: Aircraft Structures Technician Job Description:

Location: Centennial, Co. & Louisville, Co.Pay: $35.50/hrOT: $47/hrCurrently hiring:

  • Sheet Metal Mechanics
  • Avionics Technicians
  • Aircraft Mechanics
  • Composite technicians

Duration: Long Term Contract with Opportunity for Direct RolesJob Description:

$35.50

  • Per Diem Split: $23.00 taxed + $12.50 untaxed $35.50
  • OT: $47/hour

Job Description:

  • ***This opportunity is in Shreveport, LA!!!!!***
  • $28.00/hour - Ovetime: $42.00/hour$2,000/week 60 hours

    • Per diem split: $14 taxed + $14 untaxed $28.00
    • 40 to 56 hours: $28 taxed + $14 billable per diem
    • +56 hours: $42.00/hour taxed

    Job Description:

    Job Title: Interior TechnicianLocation: Renton & Everett, WAPay: $18-23/hr DOEDuration: 6 Months, can convert permanently if desiredSchedule: Day Shift with OTStart Date: September 2019/ASAPDescription: Interior technician that knows how to repair and replace bulkheads, seats, sidewalls, galley and lavatory items, overhead baggage, etc.

    **This position is in Shreveport, LA**

    • Open ended contract OR 6 month contract to hire
    • They have work scheduled for 15 years so no signs of slowing down
    • Work is in a hvy mx hangar at SHV airport

    Description

    Job Description:

    • Aerotek is looking for an A &P to help out with the C checks on Falcons and ERJ Aircrafts. MUST HAVE A &P LICENSE NO EXCEPTIONS!

    Performance Expectations:

    Description

    • A &P Mechanics will be performing maintenance, repairs and overhauls to ATR-42, ATR-72, ERJ and Cessna aircraft.
    • Sheet metal repairs and mechanical installs will be common.
    • C &D checks and Depot Level work will comprise much of the work.
    • Entry Level A &P Mechanics are encouraged to apply.

    Qualifications

    Minimum Requirement

    • Must have sheetmetal tools
    • 2 years of backshop/overhaul sheetmetal experience (must be overhaul, part 145 experience - not assembly)
    • Pay based on sheetmetal experience (overhaul repair experience)

    Job Duties

    Description

    • A &P Mechanics will be performing maintenance, repairs and overhauls to ATR-42, ATR-72, ERJ and Cessna aircraft.
    • Sheet metal repairs and mechanical installs will be common.
    • C &D checks and Depot Level work will comprise much of the work.
    • Entry Level A &P Mechanics are encouraged to apply.

    Qualifications

    ********** WORK SITE IS IN SHREVEPORT, LA ****************Below are details regarding an opportunity in Shreveport, LA. You can reach me, Andrew, at 424-531-6118 if you have any questions.

    Job Title: Structures Mechanic - Rotary WingPay: $28-31/hrPer diem: $100/day (5 days)10-30 hours of OT per weekPossible contract bonusDuration: 6-12 MonthsLocation: Medford, ORWork Environment: Aircraft hangar and shop areas in Central Point, OR (right next to Medford) Day shift Mon-Thur 6-4 and Friday 6-2:30, OT on top of that They have a very advanced electronic tool crib with access to all t

    $27.00/hour

    • Per Diem Split: $15.00 Taxed / $12 Untaxed $27.00/hour
    • OT: $22.50 taxed / $12 Untaxed $34.50/hour
    • 7 day per diem: $672/week Untaxed
    • 60 hours worked ~ $1,463 after taxes
    • 6 Month Contract to Hire

    Job Description:

    Aerotek Aviation is looking for a corporate A &P with 6-10 years of experience to start immediately. Must have experience on Gulf-stream, Citation, King Air and or Challenger air frames. Performing scheduled and unscheduled maintenance on Corporate jets. C-Checks and heavy maintenance on their charter fleet as well as the managed fleet.Experience :

  • *****This opportunity is in Shreveport, LA!!!!!****
  • $28.00/hour - Ovetime: $42.00/hour$2,000/week 60 hours

    • Per diem split: $14 taxed + $14 untaxed $28.00
    • 40 to 56 hours: $28 taxed + $14 billable per diem
    • +56 hours: $42.00/hour taxed

    Job Description:

    PREREQUISITES:Minimum total experience is four (4) years. Must have basic knowledge of all matters relative to maintenance and general upkeep of building and equipment. Must be capable of performing all types of Preventive Maintenance.ESSENTIAL JOB FUNCTIONS:Repairs and maintains machinery and equipment.

    Helicopter Mechanic Opportunity$28 to $30/hour

    • Per Diem Split: $15 taxed + $15 untaxed $30/hour

    Job Description:

    • "L" to "G" UH-60 Program, Sea Hawk (SH-60) Program, AH-64 Program, CH-47 Program
    • Phase and Reset maintenance on helicopters

    Qualifications:

    ********** WORK SITE IS IN SHREVEPORT, LA ****************Below are details regarding an opportunity in Shreveport, LA. You can reach me, Andrew, at 424-531-6118 if you have any questions.

    Preferred Qualifications: Able to read and interpret schematics, assembly drawings, process specifications, technical manuals, written instructions, test procedures, etc.Able to setup and use a variety of precision measuring instruments such as: dial indicators, micrometers, gauges, protractors, and calipers, etc.Able to use common hand tools such as: drills, reamers, deburrers, files, rivet gu

    Job Description: Structural Assembly for the fuselage section of the AirBus 350XWB. Aircraft Assemblers will be responsible for drilling and countersinking composite and metal parts. Aircraft Assemblers will be responsible for reading metric blueprints and following work instructions. Must be familiar with aircraft parts and structural assembly.

    Pages

    About D.O.M. Magazine

    D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

    Privacy Policy  |  Cookie Policy  |  GDPR Policy

    More Info

    Joe Escobar (jescobar@dommagazine.com)
    Editorial Director
    920-747-0195

    Greg Napert (gnapert@dommagazine.com)
    Publisher, Sales & Marketing
    608-436-3376

    Bob Graf (bgraf@dommagazine.com)
    Director of Business, Sales & Marketing
    608-774-4901