Job Listings

The position reports directly to the Director of Maintenance. Duties: Daily, scheduled and non-scheduled, maintenance of our aircraft.Positioning / towing aircraft prior to launch and after recovery operations. Service aircraft lavatories and water systems.

Skill: A&P Mechanic (Completions)Duration: 3+ months (open ended)Location: Little Rock ARAircraft: Falcon JetSalary: please call Strom Aviation for compensation details (800) 743-8988; Bonuses OfferedDescription:Must have experience on both the flight line trouble shooting and be able to work on new planes installing new equipment.

$31/HRBONUS: 1st paycheck: $250 30 calendar days: $37560 calendar days: $37590 calendar days: $500 120 calendar days: $500 180 calendar days: $750 Total bonus is $2,750 Sheet Metal Mechanic - Indianapolis, INThe Technician A, S/M is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, with minimal supervision.

Structural Technician, Oklahoma City, OKSUMMARYMust be able to accomplish any and all repairs, modifications, E.A's, etc, with minimal or no supervision on Boeing 737, MD-80, CRJ/ERJ aircraft. Must be able to use SRM, all tech data, and aircraft drawings to locate part numbers and accomplish repairs. Must be able to fabricate parts.

A&P Technician - Oklahoma City, OKDescription SUMMARY Must be able to perform intermediate/heavy maintenance tasks with minimal or no supervision on Boeing 737, MD-80, CRJ/ERJ aircraft. Must be able to perform flight control and engine throttle rigging. Must be able to use the FAA approved data proficiently(i.e., IPC, M/M, OHM, SRM.) Must be able to perform excellent quality work.

$30/hr BONUS:1st paycheck: $250 30 calendar days: $37560 calendar days: $37590 calendar days: $500 120 calendar days: $500 180 calendar days: $750 Total bonus is $2,750 A&P Mechanic - Indianapolis, INThe Technician A, A/P is responsible for performing intermediate/heavy maintenance tasks without supervision.

Mechanics I must have a combination of experience to repair engines,
sheet metal, structural, hydraulic, electrical, power train and general
mechanical maintenance of moderate difficulty, required to meet the
assigned missions. Makes repairs to aircraft and follows direction of
higher graded workers. The Aircraft Mechanic l troubleshoots

AeroGuard Flight Training Center is looking to hire multiple A&P Mechanics!This position is responsible for the repair and maintenance of AeroGuard FTCaircraft and equipment.Responsibilities include:- Perform scheduled inspections, routine servicing and preventive maintenance on aircraft as well as perform unscheduled maintenance, troubleshooting and repairs- Must have the ability to read a

Aircraft Worker makes repairs to aircraft following orders of higher
grade worker, assists in troubleshooting malfunctions in aircraft
structure, landing gear, flight surfaces and controls, anti-icing,
pneudraulic, engines, auxiliary power unit, and ventilation and heating
systems, removes, cleans, reinstalls, or replaces defective parts,

The Machinery Maintenance Mechanic repairs machinery or mechanical
equipment. Work involves most of the following: examining machines and
mechanical equipment to diagnose source of trouble, dismantling or
partly dismantling machines and performing repairs that mainly involve
the use of hand tools in scraping and fitting parts. Responsibilities

The Pneudraulic Systems Mechanic
maintains, modifies, and repairs hydraulic and pneumatic systems and
components that actuate mechanisms or produce, control, and regulate the
flow of fluids (liquids and gases), tests for and isolates malfunctions
in hydraulic and pneumatic systems or components, utilizing technical

Currently seeking Quality Control Inspectors with a minimum of 1 year Quality Control Experience in Tulsa, OK In a team oriented environment, perform all tasks in Initial Phase Manufacturing, Composites, or Final Phase in a timely and efficient manner to ensure aircraft parts, sub-assemblies, major assemblies, and installations are built to type design data. Essential Functions:

Structures Mechanic LAUNCH Technical Workforce Solutions is seeking Structures Mechanics with experience performing body and structural repairs on commercial aircraft for an opportunity in Atlanta, GA.

Avionics Technician LAUNCH Technical Workforce Solutions is seeking an Avionics Technician with experience performing electrical and avionics related maintenance and aircraft modifications on commercial aircraft for an opportunity in Marana, AZ.

CNC Machinist LAUNCH Technical Workforce Solutions is seeking a CNC Machinist with commercial C&D check experience on Commercial aircraft for an opportunity in Tulsa, OK. Job Duties and Responsibilities: Set up and operate automated machines to fabricate parts, applying knowledge of shop theory and procedures, shop mathematics, maintainability materials and layout techniques.

Composite Mechanic LAUNCH Technical Workforce Solutions is seeking Composite Mechanics with heavy C&D check experience on commercial aircraft for an opportunity in Marana, AZ Job Duties and Responsibilities: Composite Mechnaics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft in compliance with policies, manuals, procedures and requirements.

Quality Control Inspector LAUNCH Technical Workforce Solutions is seeking a QC Inspector for an opportunity in Savannah, GA.

HQ Aero is currently recruiting for experienced A&P Mechanics - "HIGHER WAGES"Responsibilities:Regional aircraft experience is preferred. Will performrepairs and mod's, as required. Tools must be etched. This is a LONG-TERM Position.

Talentscale is actively seeking Composite Technicians with 1 year experience for a contract to hire opportunity in Gulfport, MS. Composite Technicians are responsible for fabrication of commercial and military composite parts for land, sea and air platforms. Job Duties and Responsibilities

Set up and operate any drop hammer to produce single or double curvature work withor without the use of pressure and/or rubber plates. Develop the use ofpressure and/or rubber plates for new parts.

Richard Escobar 214-206-9693 #183;5 years of experience as a Quality Inspector in an international aviation company.·Knowledge of Quality Management Systems.·Knowledge of drawing systems, inspection plans, and inspection coordination.·Knowledge of the principles, practices, methods and tools used in the production line.·Handl

For additional information/hourly rate please contact:Recruiter: Kellye RobertsEmail Resume: kroberts@pdstech.comDirect Number: 912-257-4867PDS Tech has several new openings daily; please call if you are interested in searching for other positions available in your area!

Guardian is in the immediate need for a 205 mechanic for our summer fire fighting contracts. 205 experience preferred and any 412/AW139 experience a bonus.

Richard Escobar 817-929-1767 Description:Ability to operate a PITVerify physical part marking to part labelEnsure accuracy of counting matching physical count to system countBasic knowledge of SAP systemIdentifying damaged productAnalyze documentation requirement for specific materialAnalyze data and monitor live

Type of aircraft: CorporateLongevity: 4+ monthsType of work environment: FBOSummary

  • Avionics Technician. Beechcraft experience preferably B-99, B-1900 but turbo prop experience is also good experience for our operation.


About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (
Editorial Director

Greg Napert (
Publisher, Sales & Marketing

Bob Graf (
Director of Business, Sales & Marketing