Job Listings

ESSENTIAL DUTIES AND RESPONSIBILITIES:

1st Shift Assist mechanical engineers in the development of mechanical and electromechanical engineering designs, tests, fabrications, modifications, assemblies and components·Devise, fabricate, and assemble new or modified mechanical components or assemblies·Independently set up and tests complete prototype units and subassemblies under operational conditions·Analyze data and recommend modific

Assist mechanical engineers in the development of mechanical and electromechanical engineering designs, tests, fabrications, modifications, assemblies and components·Devise, fabricate, and assemble new or modified mechanical components or assemblies·Independently set up and tests complete prototype units and subassemblies under operational conditions·Analyze data and recommend modifications to

As an aircraft tech, you willbe responsible for systems installation and integration for XB-1, the first independently developed supersonic jet and history's fastest civil aircraft.Tasks could include landing gear installation, flight controls installation and rigging, hydraulic system installation, ECS system installation, cockpit systems integration,and various other component or systems inst

Assembles, disassembles and/or modifies systems by changing, removing, replacing or upgrading aerospace vehicle components to correct failures or implement changes. Inspects component before installation or usage to verify cleanliness and serviceability of components. Fabricates and modifies aerospace products according to specifications.

- This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies requ

Heavy Maintenance Representative • Location: Bridgeport, WV• Work Schedule: Full Time • Reports To: Heavy Maintenance Manager• Direct Reports: None • Relocation: Some relocation assistance available • Travel: No travel is expected for this position Let your career take off with PSA Airlines About Us Company Summary: As a wholly owned subsidiary of American Airlines and the fastest growing regio

WORKING WITH AEVEXBecoming part of the AEVEX Aerospace family means joining ahighly qualified and dedicated team that appreciates the opportunities andrewards that come with supporting critical, no-fail missions.At AEVEX, you'll find expertly-credentialed, innovative teamplayers who are the best at what they do and constantly strive to meet highexpectations in an ever-changing environment.

This mechanic maintains repairs and modifies aircraft structures and structural components of moderate difficulty, maintains and repairs aircraft components including but not limited to flight controls, engines, hydraulics, pneumatics, fuel systems, and mechanical components, applies technical knowledge of airframe and power plant systems in determining equipment malfunctions and applies requir

A P Mechanic LAUNCH Technical Workforce Solutions is seeking an A P Mechanic with commercial C D check experience on Commercial aircraft for an opportunity in Mobile, AL Job Duties and Responsibilities: A P Mechanics will maintain, inspect, repair, modify, overhaul and troubleshoot commercial aircraft in compliance with policies, manuals, procedures, and requirements.

Duration 1 yearDescription Chipton-Ross is seeking a CNC Programmer / Machinist for an opportunity in Redondo Beach, CA. RESPONSIBILITIES:Northrop Grumman Aerospace Systems has an opening for a Mechanical Technical 3 (1st Shift) to join our team of qualified, diverse individuals. This position will be located in Redondo Beach, CA.

Duration 12 MonthsDescription Chipton-Ross is seeking a Supplier Quality Specialist 3 for an opening in Auburn, WA. RESPONSIBILITIES:Plans and conducts audits and assessments of supplier''s systems, processes and products. Documents and reports audit and assessment results. Inspects or verifies products for compliance with requirements.

Sam Aviation Maintenance, Inc. is a division of Florida Flyers, a large and busy Part 141 Flight Training Facility located in Southeast Florida, Jacksonville area. A fleet of 30+ airplanes, Cessna 152/172/182, Piper PA28 Seneca, Beechcraft plus other planes are professionally maintained including but not limited to 100 hr inspections, Annual Inspections, Discrepancy repairs.

  • Special Pay Rate all A P contractors approved after 8/21/19 pay rate will be 36/37 until 11/30/19 then will revert back to normal pay rate.
  • This Client has consistent work throughout the year.
  • Must have at least 24 months of previous aircraft maintenance experience. Boeing and Airbus experience preferred.

Johnson Service Group (JSG) is actively seeking Sheetmetal Mechanics with 5 years experience for a long-term contract in Red Oak, TX. The qualified candidate must be able to start on September 9th. This is a fantastic opportunity to gain exposure with a leader in the aerospace industry. Job Duties and Responsibilities of the Sheetmetal Mechanic are as follows: Other duties may be assigned.

Aeroteams is currently hiring
Sheetmetal Mechanics to join our team in Tampa, FL. The
position will involve repairing the structure of the aircraft. Work will include stringer repairs, skin repairs, floor beam repairs and other heavy structures work. Candidates must
have 3+ years of commercial experience. Aeroteams Benefits

Qualifications - Aircraft Technician- Great mechanical aptitude- Experience installing and maintaining aircraft systems- Drawing interpretation and inspection of components to troubleshoot assembly process- Ability to use basic measuring tools, tape measure, caliper, scales- A P certification desired- High school diploma or equivalent

Type of aircraft: 737Longevity: Long termType of work environment: CorporateSummary:

Job Description: Aerotek is looking for a sheet metal technician to start as soon as possible.2 years+ hands-on commercial and corporate aircraft, or Part 145 Repair Station experience requiredLine maintenance experience on multiple air frames within a Part 121 or Part 135, a plusExpertise in sheet metal repair, composite and bonded parts to determine scope of work required, and materials requi

Aerotek is looking for 30 Machine operators and set-up machinists for a growing Mazak CNC company that supports a reputable aerospace company.

One of our top aviation clients is looking for an Avionics specialist to join their team. This position offers long term room for growth and great long term benefits. Job Duties:

  • Troubleshoot and repair avionics systems
  • Install avionics systems and components
  • Perform functional and operational checkouts of electrical instruments

Requirements:

Currently hiring:

  • Sheet Metal Mechanics
  • Avionics Technicians
  • Aircraft Mechanics

Location: Centennial, Co. & Colorado Springs, Co.Pay: $35.50/hrOT: $47/hrDuration: Long Term Contract with Opportunity for Direct RolesJob Description:

Aerotek is looking for 20 apprentice and journeyman level skilled trade laborers for a large fabrication company that works with window systems, ornamental metals and panels. These positions offer weekly overtime and can start immediately.Job Duties

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901