Job Listings

SummaryPerform a variety of complex inspections on fabricated sheet metal parts and bonded structures to meet customer and Piper quality standards. Use various tools specific to trade such as calipers, micrometers, height gauges, depth gauges, and other equipment. Work independently or with minimal direction from Supervisor.Required SkillsEssential Duties and Responsibilities

Perform a wide variety of complex operations in support of the flight testing of aircraft; install, adjust and troubleshoot aircraft systems including but not limited to engine set up, fuel calibrations, avionics and engine instrumentation packages, etc.; fueling and de-fueling procedures on both piston and turbine engines; set-up and adjust aircraft flight control systems to obtain optimum fli

Summary:Plan and perform a wide variety of complex planning, fabricating, installing, balancing, and repairing of air conditioning and refrigerant systems including, but not limited to, water chillers, cooling towers, roof top and split package units, walk-in and roll-around freezers, ice makers, drinking fountains, chemical testing, etc.

Plan, lay out, repair parts, and perform limited rework for close fit to any routine sheet metal assembly and installation work of products on aircraft, utilizing acquired knowledge of assembly methods/techniques, and knowledge of sheet metal properties.

Plan, lay out, repair parts and perform limited rework for close fit; any complex and intricate sheet metal assembly and installation work of products on aircraft, utilizing excellent knowledge of assembly methods and techniques, and knowledge of sheet metal properties.

New product development and provide technical expertise in the area of avionics/electrical systems equipment specification and installation on all products manufactured by the Company.Required SkillsTo perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

Instrument panel build-up consisting of set up, operation, analysis, inspection of complex productions electronic components and systems to ensure compliance with Piper/FAA regulations.

Structures Mechanic**Paid Flight** LAUNCH Technical Workforce Solutions is seeking Structures Mechanics with experience performing body and structural repairs on commercial aircraft for an opportunity in Puerto Rico.

Position Summary: Responsible for completing electrical installations and connections which include Basic Aircraft installation, Cabin Installations, Cockpit and Cargo and Ground Test. Primary Responsibilities:

The RS Sheetmetal Technician II works under general supervision to safely layout, fabricate and install parts, equipment and fabricated items on aircraft following established operating procedures. All work performed should be in accordance with company design specifications, quality standards and completed work should meet customer expectations.

Under minimal supervision, repair and overhaul internal and external aircraft assemblies, subassemblies and components in accordance with Repair Station requirements. Principal Duties and Responsibilities:Essential Functions: 1. Apply advanced skills in administration and use of procedures, techniques, tools, materials and/or equipment, as appropriate to area of specialization. 2.

PAY and BENEFITS:$29/hour OT available. Great Per Diem PackageHealth, dental and vision insurance offered. Contract is open-ended and expected to be long term. Cash Advances offered. (Must be on the job for at least 3 days, $300 max)Weekly pay.QUALIFICATION REQUIREMENTS:Must have at least 2 years of Structures experience. Must have experience in MROs. Must be able to obtain a SIDA badge.

Talentscale is currently hiring several Wire Harness Technicians for a top Aerospace company near the Conifer Colorado area. Temp to hire, salary is $25 an hour with potential increases after 90 day evaluation. Split per diem!! $$$. Ideal for an Aircraft Electrician or Avionics Technician who has built Wire Harnesses Responsibilities:

Talentscale is currently hiring several Wire Harness Technicians for a top Aerospace company near the Conifer Colorado area. Temp to hire, salary is $25 an hour with potential increases after 90 day evaluation. Split per diem!! $$$. Ideal for an Aircraft Electrician or Avionics Technician who has built Wire Harnesses Responsibilities:

Under minimal supervision, assists in the removal/installation of avionics electrical components, fabrication of wire harnesses, installations, terminations, ring-out, and functional tests of avionics/electrical systems.Principal Duties and Responsibilities:Essential Functions:1.

Position Title: Test Technician Department/Location: R D/Pennsylvania Reports to: Engineering Manager Position summary: Carson Helicopters is looking for a motivated technician to setup, run and analyze results for various types of mechanical testing in support of on-going aviation R D program.

Entry level Aviation TechnicianIf you have your A P license, willing to work hand to hand with your colleagues or on your own, then look no further. AirNet II, a full service 145 repair station located in Columbus Ohio who understands the vital importance of expert timely service and aircraft maintenance is looking for an entry level aviation technician to work a day shift, Monday - Friday.

POSITION PURPOSEPerforms preventive maintenance, repair, modifications and other maintenance of aircraft, components and related equipment in accordance with standards and regulations.ESSENTIAL DUTIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

POSITION PURPOSEPerforms preventive maintenance, repair, modifications and other maintenance of aircraft, components and related equipment in accordance with standards and regulations.ESSENTIAL DUTIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily.

Stop by our booth at the MIAT College of Technology Career Fair and chat with Recruiters and Republic Associates about Republic Airways maintenance opportunities! Please register for the event, so we know to look forward to seeing you there!Location: MIAT College of Technology533 Northpark Central Dr. Houston, TX 77073

POSITION PURPOSEOversees the quality and quantity of all line maintenance work performed by Company and on-call maintenance provider vendors.ESSENTIAL DUTIES To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. Reasonable accommodation may be made to enable individuals with disabilities to perform the essential functions.

Join our EWR Base manager, Lester Lopez, and maintenance recruiters at Aviation Institute of Maintenance New Jersey! Be prepared to learn about Republic Airways growing fleet, and opportunities to join our maintenance team. Location:Teterboro School of Aeronautics/Aviation Institute of Maintenance- New Jersey 80 Moonachie AveTeterboro, NJ 07608

Position: A &P Mechanic (Lear) - Chattanooga, TNOnly qualified candidates with the below experience will be considered for this position.Job Description:

Position: Aircraft Mechanics - Tampa, FLOnly qualified candidates with the below experience will be considered for this position.** $1500 Sign on Bonus !!

Position Title: Structures Mechanic - Tampa, FLOnly qualified candidates with the below experience will be considered for this position.** $1000 Sign on Bonus !!

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901