Job Listings

Position: A &P Technician - Bridgeport, WVOnly qualified candidates with the below experience will be considered for this position.Job Description:Perform all work in a safe and timely manner 8226; Troubleshoot, repair, install, inspect and perform maintenance on customer aircraft 8226; Perform and document work performed per appropriate manuals and regulations as required 8226; Operate

Sheet Metal Mechanic - Bridgeport, WVJob Description:The Structures Technician will troubleshoot, inspect and perform maintenance on customer aircraft sheet metal components, composites and hydraulics. Modification and repair exp must be demonstrated on resume.Remove / install aircraft components as required. Must have a min of 2-3 yrs in a heavy MRO environment.

Position: Avionics Technician - Bridgeport, WVOnly qualified candidates with the below experience will be considered for this position.Job Description:Troubleshoot repairs, inspect, modify and service aircraft avionics, electrical and electronic equipment. Perform and document all work performed per appropriate manuals and regulations as required.

Fusion Welder - Edgewood, NYJob DescriptionThe Fusion Welder will position and weld parts according to special instructions, blueprints and/or travelers.Responsibilities:Read blueprints and drawings and take or read measurements to plan layout and proceduresDetermine the appropriate welding equipment or method based on requirementsSet up components for welding according to specifications (e.g.

Avionics Installer - Georgetown, KYExperience in wire harnesses, installing harnesses, terminating wires, continuity checks and power checks.Aviation Personnel currently offers:.50 per mile up to $200.00 Travel Pay on your first check, plus a $100.00 Monthly Bonus!Aviation Personnel offers great benefits like: Holiday Pay, Vacation Pay, $100.00 referrals fees and Direct Deposit.

Sheet Metal Mechanic - Meza, AZPerform structural repairs, modifications, and upgrades on Beechcraft King Air and Bell helicopter airframes.I. Fabricate sheet metal components to support upgrades and modificationsII. Perform structural repairs, modifications, and upgrades on new/used Bell model helicoptersIII. Perform fiberglass and bonded honeycomb structural repairs. Recommended.IV.

Position: A &P Mechanic - Winston-Salem, NCOnly qualified candidates with the below experience will be considered for this position.Job Description: Must have 3-4 yrs min experience on airframes they work on / any combination of the following will work: Beechcraft Single, Beechcraft Twin, Beechjet Series, Cessna, Cirrus, Citation Series, DeHavilland Dash 8, Embraer EMB-120 Series, Fairchil

This hourly, non-exempt position requires performing complex composite and sheet metal repairs to components, primarily removed fromcommercial and regional aircraft (Boeing, Airbus, Embraer, and Bombardier). The position requires extensive experience performing repairs utilizing various prepregs, adhesive films, and other complex composite repair materials.

This hourly, non-exempt position requires a basic knowledge of turbine aircraft and the related systems. The job includes varying amounts of parts replacement or repair, electrical troubleshooting, hydraulic and pneumatic system work, inspection of aircraft or systems and general mechanical applications.

Airframe and Powerplant Mechanic/Technician JOB SUMMARY:TechFlyte is a leading supplier of aeronautic professionals to premier aviation companies and is looking to hire top-rate A P Technicians/Mechanics in Kansas City, MO area!

Composite Mechanic/Technician JOB SUMMARY:TechFlyte is a leading supplier of aeronautic professionals to premier aviation companies and is looking to hire top rate Composite Technicians in the Kansas City, MO area!

SUMMARY:The A P Technician repairs, troubleshoots, inspects and performs maintenance on Customer aircraft.Performs and documents all work performed per appropriate manuals and regulations as required.

Very Urgent Job Opportunity! Serious and experienced A P Mechanic Airframe Powerplant. Lear Jet, Dassault Falcon Jet, Gulfstream, Citation, Bombardier, Hawker Beechcraft, Embraer, etc. Aircraft Mechanics! Only Serious Candidates Need to Apply! Please send an updated copy of your resume in a Word Document Immediately! We can set up interviews for you immediately!

DescriptionAdjusts, aligns, and calibrates aircraft systems, using hand tools, gauges, and test equipment.Examines and inspects engines or other components for cracks, breaks or leaks.Disassembles and inspects parts for wear, warping, or other defects.Assembles and installs electrical, plumbing, mechanical, hydraulic and structural components and accessories using hand tools and power tools.Ser

SUMMARY The A P Technician for the USMS is responsible for performing intermediate/heavy maintenance tasks, minor through major structural repairs and modifications, and routine R E work without supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES Must be comfortable exercising the full privilege of A P license. Perform flight control and engine throttle rigging.

SUMMARY The R E Technician for the USMS is responsible for effectively performing R E routine work associated with aircraft maintenance.ESSENTIAL DUTIES AND RESPONSIBILITIES Detailed knowledge of aircraft avionics and electrical systems. Understand engineering methodology for systems installations. All other duties as assigned.

SUMMARY The A P Technician I is responsible for performing intermediate/heavy maintenance tasks without supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES - Perform flight control and engine throttle rigging. - Able to use FAA approved data (i.e. IPC, M/M, OHM, SRM) proficiently. - Insure work performed adheres to high quality standards.

SUMMARY The R E Technician I is responsible for effectively performing R E routine work associated with heavy aircraft A, B, C and D checks. ESSENTIAL DUTIES AND RESPONSIBILITIES Detailed knowledge of aircraft avionics and electrical systems. Understand engineering methodology for systems installations. All other duties as assigned.

LAUNCH Technical Workforce Solutions is seeking an Aircraft Maintenance D, Electrical for an opportunity in Waco, TX. Job Duties and Responsibilities: The successful candidate will possess at least 8 years of experience (or equivalent, see qualifications) on aircraft electrical assembly and electrical system testing.

Firehawk Helicopters has an opening for Black Hawk Mechanics.The position includes Field and Hangar maintenance, as wellas travel during the active Fire Suppression season. Firehawk pays competitive hourly rate withovertime during the Fire Suppression season. Travel schedule varies based on experience. Company pays per diem, hotel, travel stipendand airline travel.

SUMMARY The Sheet Metal Technician I is responsible for high proficiency in all minor through major repairs, modifications, E.A.s, with minimal supervision. ESSENTIAL DUTIES AND RESPONSIBILITIES Highly proficient in fabrication, cold working, flap peening and jacking/shoring aircraft. Highly proficient in using technical data and drawings to locate part numbers and accomplish repairs.

LAUNCH Technical Workforce Solutions is seeking an Aircraft Maintenance D, Flightline for an opportunity in Waco, TX. Job Duties and Responsibilities: The successful candidate will possess at least 8 years of experience (or equivalent, see qualifications) on aircraft flightline operations.

LAUNCH Technical Workforce Solutions is seeking an Aircraft Maintenance D, Structural for an opportunity in Waco, TX. Job Duties and Responsibilities:The successful candidate will possess at least 8 years of experience (or equivalent, see qualifications) on aircraft heavy structures and modifications.

Assembly Mechanic LAUNCH Technical Workforce Solutions is seeking an Assembly Mechanic for an opportunity in Victorville, CA. Job Duties and Responsibilities:Assemble, install, seal, rig, inspect, and complete precision and other structural and system components, working from drawings, documents, process specifications, quality control requirements, and established processes and procedures.

Maintains, repairs, and overhauls aircraft engines,
modules, components and accessories to assure compliance with established
company standards, contractual obligations and airworthiness regulatory
requirements. Performs technical troubleshooting using mechanical ability and

Pages

About D.O.M. Magazine

D.O.M. magazine is the premier magazine for aviation maintenance management professionals. Its management-focused editorial provides information maintenance managers need and want including business best practices, professional development, regulatory, quality management, legal issues and more. The digital version of D.O.M. magazine is available for free on all devices (iOS, Android, and Amazon Kindle).

Privacy Policy  |  Cookie Policy  |  GDPR Policy

More Info

Joe Escobar (jescobar@dommagazine.com)
Editorial Director
920-747-0195

Greg Napert (gnapert@dommagazine.com)
Publisher, Sales & Marketing
608-436-3376

Bob Graf (bgraf@dommagazine.com)
Director of Business, Sales & Marketing
608-774-4901